Have a customer that has a marantz 5008 with a samsung bluray player that has been installed for 4-5 years working perfectly until the last few months where the bluray player works intermittently. It turns on but no picture is displayed. Have done a firmware upgrade on both the player and receiver and nothing works. Replaced the HDMI cable from player to receiver, tried a different player, tried different input on the receiver nothing works. I unplugged and old player from power, moved input on the receiver turned everything on and it works. Then turn everything off as is was and then back on, no picture again. Any ideas
Also I have ran a new HDMI directly from player to tv and just put the audio into the receiver and this works but the client wants the OSD for volume...
So you are saying if you DON’T have the splitter prior to the Marantz receiver the DTV won’t work either? That points to some wacky HDMI issue, and I still blame the Marantz.
When the BD picture fails are you loosing the GUI volume bar as well, or just the BD picture? Does sound also quit or does it keep going from the Marantz?
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.