Post 1 made on Sunday April 29, 2018 at 08:50 |
james_aa Long Time Member |
Joined: Posts: | January 2018 235 |
|
|
We've got an existing c. 10 year old analog coax door entry system made by Elvox.
From what i can see the outdoor door entry camera video signal is sent over coax to the control box and then the control box links to the internal monitor. The control (eg. door release) seems to be controlled by some twisted pair cables or a flex.
We're also putting in a Hikvision IP system using a DS-7608NI-K2/8P NVR.
Would it be possible to branch the video from the coax of the door entry monitor and then put it into some sort of modulator / transformer / so that we could run the signal over cat6 and put it as an input into the NVR ?
If so what kit would be required ?
|
|
Post 2 made on Sunday April 29, 2018 at 09:16 |
Debooter Long Time Member |
Joined: Posts: | January 2013 34 |
|
|
Hikvision makes a single channel encoder (DS-6701HWI/HFI) that would convert the signal to IP for you
|
Compu-Global-Hyper-Mega-Net |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.