Your Universal Remote Control Center
RemoteCentral.com
Custom Installers' Lounge Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Can i replace a PTX-3 with an MTX-3?
This thread has 8 replies. Displaying all posts.
Post 1 made on Tuesday April 17, 2018 at 13:11
Mac Burks (39)
Elite Member
Joined:
Posts:
May 2007
17,515
Anyone remember if you can use an MTX-3 with a prodigy processor? I have a system with a dead PTX-3...and i have 3 MTX-3's in stock so i would like to use one of them.
Avid Stamp Collector - I really love 39 Cent Stamps
Post 2 made on Tuesday April 17, 2018 at 14:26
thecynic315
Senior Member
Joined:
Posts:
August 2008
1,001
as long as it is a pmc3 on the latest firmware-yes
Post 3 made on Tuesday April 17, 2018 at 16:23
kgossen
Super Member
Joined:
Posts:
March 2008
3,026
On April 17, 2018 at 13:11, Mac Burks (39) said...
Anyone remember if you can use an MTX-3 with a prodigy processor? I have a system with a dead PTX-3...and i have 3 MTX-3's in stock so i would like to use one of them.

I'm more concerned with the fact you have 3 MTX-3s?????

My deepest condolences.
"Quality isn't expensive, it's Priceless!"
OP | Post 4 made on Tuesday April 17, 2018 at 20:51
Mac Burks (39)
Elite Member
Joined:
Posts:
May 2007
17,515
I honestly don't know where two of them came from. The other one was a freebie for selling a lot of product. I also found a tpmc-3x that must have been doa and got sent to the office instead of the project after repair....like 7 Yeats ago!
Avid Stamp Collector - I really love 39 Cent Stamps
Post 5 made on Tuesday April 17, 2018 at 23:31
Stryker
Long Time Member
Joined:
Posts:
November 2010
402
I got a lot of Yeats. But 7? That them there is a lot of Yeats
"If they give you ruled paper, write the other way"
Post 6 made on Wednesday April 18, 2018 at 02:20
sofa_king_CI
Super Member
Joined:
Posts:
June 2009
4,230
If it’s a PMC3 can’t you use any Crestron remote??
do wino hue?
Post 7 made on Wednesday April 18, 2018 at 09:36
thecynic315
Senior Member
Joined:
Posts:
August 2008
1,001
On April 17, 2018 at 20:51, Mac Burks (39) said...
I honestly don't know where two of them came from. The other one was a freebie for selling a lot of product. I also found a tpmc-3x that must have been doa and got sent to the office instead of the project after repair....like 7 Yeats ago!

I'm sorry. I'm so sorry.

Though if the battery looks newish it'll work with the MTX3s
Post 8 made on Thursday April 19, 2018 at 09:07
twmoonly
Long Time Member
Joined:
Posts:
October 2010
197
On April 17, 2018 at 16:23, kgossen said...
I'm more concerned with the fact you have 3 MTX-3s?????

My deepest condolences.

+1
Post 9 made on Tuesday April 24, 2018 at 21:49
Techsquad
Long Time Member
Joined:
Posts:
August 2010
355
On April 19, 2018 at 09:07, twmoonly said...
+1

+2 :)

But yes. Just let simpl thinks it’s a PTX3 and acquire your MTx3.
On VTPro, save your project as a MTx3 otherwise it won’t upload.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse