|
|
 |
|
The following page was printed from RemoteCentral.com:
|
Need Rs232 Commands for Sony UDP-X1000ES...
| |
|
| Topic: | Need Rs232 Commands for Sony UDP-X1000ES 4k Bluray player This thread has 14 replies. Displaying all posts. |
|
| Post 1 made on Monday March 26, 2018 at 19:06 |
sofa_king_CI Super Member |
Joined:
Posts: | June 2009
4,230 |
|
|
If I remember right, the first pair of digits in the sony commands strings is a device identifier, any reason they would use a different code for the "UDP" over the "BDP" players?
|
do wino hue? |
|
| OP | Post 2 made on Tuesday March 27, 2018 at 17:36 |
sofa_king_CI Super Member |
Joined:
Posts: | June 2009
4,230 |
|
|
I'm connected and I see feedback when I manually power the unit on/off, but when I send commands I get nothing. In the System Menu, i turned ON entenal control or whatever its called, I'm assuming thats the RS232 control.
Not sure what to do next. Can't get any commands to work.
|
do wino hue? |
|
| Post 3 made on Tuesday March 27, 2018 at 18:27 |
Shaner Long Time Member |
Joined:
Posts: | October 2012
136 |
|
|
Remote Start.
I’m having an issue waking up the X800 model even though it supports WOL and I have Remote Start on.
I haven’t contacted the developer of the driver yet. (For Elan G)
|
|
| OP | Post 4 made on Tuesday March 27, 2018 at 18:39 |
sofa_king_CI Super Member |
Joined:
Posts: | June 2009
4,230 |
|
|
once it's on do you have control? So far I have no control period
|
do wino hue? |
|
| Post 5 made on Wednesday March 28, 2018 at 00:32 |
Shaner Long Time Member |
Joined:
Posts: | October 2012
136 |
|
|
Yep. I’m good except for power on.
Remote Start is enabled by default, so I haven’t had to mess with that.
...just no power on working, at the moment.
|
|
| OP | Post 6 made on Wednesday March 28, 2018 at 13:48 |
sofa_king_CI Super Member |
Joined:
Posts: | June 2009
4,230 |
|
|
Hmmm I can’t get anything to work. Do you know it it’s the same commands used for older BDP models?
|
do wino hue? |
|
| Post 7 made on Wednesday March 28, 2018 at 19:16 |
Shaner Long Time Member |
Joined:
Posts: | October 2012
136 |
|
|
I believe so. It’s a third-party driver from IntrinsicDev so you can’t see the commands but I’ve also used it on the newer model non-4K Blu-ray players.
Haven’t tried it on old ones.
|
|
| Post 8 made on Friday March 30, 2018 at 23:24 |
swanisabella Lurking Member |
|
|
|
| Post 9 made on Saturday March 31, 2018 at 08:41 |
Ranger Home Super Member |
Joined:
Posts: | June 2007
3,486 |
|
|
IP control works. Power on too but requires TWO drivers, one specifically for power on.
|
|
| Post 10 made on Saturday March 31, 2018 at 12:31 |
Shaner Long Time Member |
Joined:
Posts: | October 2012
136 |
|
|
I was just testing a system with the UBP-X800 yesterday with the same third-party Elan driver and my power control was working perfectly.
I know the other job has the same settings but wasn’t working. I need to go back and check that one.
|
|
| Post 11 made on Saturday March 31, 2018 at 14:11 |
rr61522 Long Time Member |
Joined:
Posts: | March 2008
170 |
|
|
On March 31, 2018 at 12:31, Shaner said...
I was just testing a system with the UBP-X800 yesterday with the same third-party Elan driver and my power control was working perfectly.
I know the other job has the same settings but wasn’t working. I need to go back and check that one. We do Control4, not Elan, but one of the firmware versions for the X800 had lots of network issues, including not accepting Wake On Lan. It would also not always connect to the update server to get the newer version that fixed the problems, so they had to be updated by USB. Might be something to look at while you are there.
|
|
| Post 12 made on Saturday March 31, 2018 at 21:45 |
Impaqt RC Moderator |
Joined:
Posts: | October 2002
6,233 |
|
|
On March 31, 2018 at 08:41, Ranger Home said...
IP control works. Power on too but requires TWO drivers, one specifically for power on. This is very confusing to me. I dont recall ever having to use 2 drivers for my 1000ES's o.O
|
|
|
| Post 13 made on Sunday April 1, 2018 at 09:18 |
Ranger Home Super Member |
Joined:
Posts: | June 2007
3,486 |
|
|
On March 31, 2018 at 21:45, Impaqt said...
This is very confusing to me. I dont recall ever having to use 2 drivers for my 1000ES's
o.O You're using IP? Something to do with wake on lan or something to that affect. A different set of of command parameters for "on".
|
|
| Post 14 made on Sunday April 1, 2018 at 21:02 |
Impaqt RC Moderator |
Joined:
Posts: | October 2002
6,233 |
|
|
Yes, IP Control.
Shortly after they came out, there was a firmware update that fixed quickstart and/or the IP On Command. the 1000ES does indeed respond to an ON command. It doesnt need WoL
I think I would of had a few phone calls by now if my 1000es's were not turning on.
|
|
|
| Post 15 made on Thursday May 31, 2018 at 11:51 |
thefunkystink Lurking Member |
|
|
On April 1, 2018 at 21:02, Impaqt said...
Yes, IP Control.
Shortly after they came out, there was a firmware update that fixed quickstart and/or the IP On Command. the 1000ES does indeed respond to an ON command. It doesnt need WoL
I think I would of had a few phone calls by now if my 1000es's were not turning on. Can you possibly help me with a "UBP-X1000ES IP Control for Dummies" I cannot for the life of me figure it out. Only port I can succesfully connect from my Crestron processor is TCP port 9090. I have downloaded a bunch of modules, but I've been unsuccessful so far. BDP is running FW M37.R.0178 if that helps.
|
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
