| Post 1 made on Monday March 19, 2018 at 18:34 |
3PedalMINI Loyal Member |
Joined:
Posts: | July 2009
7,860 |
|
|
Anyone have a 30second skip code for X1 and C4?
|
The Bitterness of Poor Quality is Remembered Long after the Sweetness of Price is Forgotten! - Benjamin Franklin |
|
| Post 2 made on Monday March 19, 2018 at 19:17 |
Mac Burks (39) Elite Member |
Joined:
Posts: | May 2007
17,519 |
|
|
Don't help your clients steal TV. Did you try this work around? [Link: forums.xfinity.com]
|
Avid Stamp Collector - I really love 39 Cent Stamps |
|
| OP | Post 3 made on Monday March 19, 2018 at 20:54 |
3PedalMINI Loyal Member |
Joined:
Posts: | July 2009
7,860 |
|
|
I did! Tried it from the remote and it worked but when I tried to learn it it did the normal. Must be an RF only code
|
The Bitterness of Poor Quality is Remembered Long after the Sweetness of Price is Forgotten! - Benjamin Franklin |
|
| Post 4 made on Monday March 19, 2018 at 21:47 |
buzz Super Member |
Joined:
Posts: | May 2003
4,380 |
|
|
There is a slight possibility that there is an IR command. You could use a camera to observe the X1's remote associated with the code.
Another (unlikely) avenue to pursue would be to unpair the remote -- forcing it to revert to IR. Now try the work around and see of there is an IR code and appropriate response from the box.
---
I don't have an X1 box to play with. As you are pressing the buttons on the remote, is there a response from the box for each of the button presses? Is there a timing consideration? (if you press the buttons too fast or too slow, does the 30 second skip degrade into a sequence of commands -- possibly going to channel 30 or 500?)
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
