| Post 1 made on Monday November 29, 2004 at 11:36 |
bfortin Lurking Member |
Joined:
Posts: | November 2004
3 |
|
|
Hi,
I just installed a IR Extender RFX 6000. It's working fine exept for the Harman Kardon AVR500. The RFX light flash but the AVR doesn't respond.
Does anyone have experimented this problem with Harman Kardon receiver?
Thanks
|
|
| Post 2 made on Monday November 29, 2004 at 17:52 |
Evil Twins Long Time Member |
Joined:
Posts: | November 2003
132 |
|
|
If the H/K has an ir jack on the back use this instead of the flasher, this will usually give better performance. Also check to see if the remote will operate the H/K in ir mode first.
|
|
| Post 3 made on Monday November 29, 2004 at 21:58 |
PennyG Long Time Member |
Joined:
Posts: | March 2004
231 |
|
|
HK IR is strong. Move the flasher farther away, (about an inch or two is usually enough), or program the IR from further back during programming.
|
|
| OP | Post 4 made on Tuesday November 30, 2004 at 18:11 |
bfortin Lurking Member |
Joined:
Posts: | November 2004
3 |
|
|
Thanks for the advice. Yes, the IR work. It's only with the RFX. I will try with the jack.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
