| Post 1 made on Friday November 26, 2004 at 14:07 |
Tom Ciaramitaro Loyal Member |
Joined:
Posts: | May 2002
7,967 |
|
|
Someone else did the prewiring, and I have a K2 in the client's master that runs downstairs and accesses the stack for house music, etc.
There is some local equipment in the master that needs to have an IR link to so they can aim at the keypad and operate the local receiver/DVD/Sat box.
The cat5e goes from the K2 directly downstairs...but...can I just pluck the IR connections out (open the cat5 as it passes by the local equipment and run those leads only to a connecting block) and make it fly? The IR is not needed for downstairs, as they only do the keypad manually in the master.
Hope I explained it clearly. Thanks for your input.
=Tom
|
There is no truth anymore. Only assertions. The internet world has no interest in truth, only vindication for preconceived assumptions. |
|
| Post 2 made on Saturday November 27, 2004 at 00:34 |
RTI Installer Super Member |
Joined:
Posts: | March 2002
3,320 |
|
|
Yes, just dont add any additional power supplys
|
Never Ignore the Obvious -- H. David Gray |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
