Your Universal Remote Control Center
RemoteCentral.com
Custom Installers' Lounge Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Zone 2 Help Denon AVR
This thread has 5 replies. Displaying all posts.
Post 1 made on Friday March 10, 2017 at 07:08
JJackson
Long Time Member
Joined:
Posts:
July 2005
93
I have a customer with a theater in there greatroom
Denon AVR-X4000
Sony BPS-7200
TWC cable box
URC-MX-890
MRF base

Everything works fine. He added a kitchen TV that he wants to use the Zone 2 output of the AVR.No audio just the video. It was wired with a 50ft HDMI. It worked with just the cable box only and a HDMI splitter, when we put the Zone 2 monitor out of the receiver it works but would lose sync and cut out after a few minutes. We replaced the HDMI with a set of HD baseT baluns. Same thing works, but then cuts out after a few minutes. I threw in an Ethereal DAD for fun and the same thing. I don't want to take everything down to component video(the DVD I can't).
Any Ideas or suggestions?
Post 2 made on Friday March 10, 2017 at 07:31
Don Heany
Senior Member
Joined:
Posts:
September 2008
1,178
Did you try the Z2 HDMI out into the 1x2? Clock stretching kicked me in the nuts the other day and the 1x2 bandaid worked like a champ.
Post 3 made on Friday March 10, 2017 at 08:09
Don Heany
Senior Member
Joined:
Posts:
September 2008
1,178
& disable video upconversion?
OP | Post 4 made on Friday March 10, 2017 at 08:18
JJackson
Long Time Member
Joined:
Posts:
July 2005
93
I will check the conversion.
I took the splitter out of the system. Are you saying put it back into the loop?
AVR zone 2 monitor out + to HDMI splitter + to TV?
Post 5 made on Friday March 10, 2017 at 08:22
mrtristan
Select Member
Joined:
Posts:
October 2003
1,634
You can use an inexpensive Wyrestorm 4x2 HDMI matrix. One output has analogue audio extraction you can use for the zone 2 amp. 1080p only
Post 6 made on Friday March 10, 2017 at 12:39
Don Heany
Senior Member
Joined:
Posts:
September 2008
1,178
Yes, put it back in the loop- this also nulls 4K but with a Kitchen display that shouldn't be an issue...


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse