|
|
|
The following page was printed from RemoteCentral.com:
Matrices Best Practices with AVR...
| |
|
Topic: | Matrices Best Practices with AVR involved in a zone? This thread has 31 replies. Displaying posts 1 through 15. |
|
Post 1 made on Wednesday March 1, 2017 at 15:16 |
3PedalMINI Loyal Member |
Joined: Posts: | July 2009 7,860 |
|
|
Designing a few systems here. One job has 5 zones of video with 3 surround sound zone's (will be sony es2000's)
System will be JAP..
just curious how everyone designs systems. I normally would put all of my sources into the transmitters and then a receiver for each AVR and then HDbaseT out to the TV's
is this a best practice for this scenario?
for a job with 1 surround sound zone and 3 video locations I would use the loop out functions of the transmitters into the AVR and then just use HDbaseT out to the TV from AVR...
is all of this kosher? just wanted to make sure I havent been doing it wrong all of these years! :P
|
The Bitterness of Poor Quality is Remembered Long after the Sweetness of Price is Forgotten! - Benjamin Franklin |
|
Post 2 made on Wednesday March 1, 2017 at 16:04 |
BlackWire Designs Senior Member |
Joined: Posts: | September 2006 1,401 |
|
|
JAP Receiver on each SS AVR JAP Receiver on each display
Why do you want to go out of the AVR in the first place?
|
BlackWire Designs |
|
Post 3 made on Wednesday March 1, 2017 at 16:17 |
Fins Elite Member |
Joined: Posts: | June 2007 11,627 |
|
|
On March 1, 2017 at 16:04, BlackWire Designs said...
JAP Receiver on each SS AVR JAP Receiver on each display
Why do you want to go out of the AVR in the first place? Can JAP do that and not screw up the audio? I did basically what you are saying with an hdbaset matrix that had dual outputs on each zone (cat to the display and hdmi to the avr in the rack) and it tried to knock the audio to 2 channel because of the display.
|
Civil War reenactment is LARPing for people with no imagination.
|
|
Post 4 made on Wednesday March 1, 2017 at 16:43 |
BlackWire Designs Senior Member |
Joined: Posts: | September 2006 1,401 |
|
|
On March 1, 2017 at 16:17, Fins said...
Can JAP do that and not screw up the audio? I did basically what you are saying with an hdbaset matrix that had dual outputs on each zone (cat to the display and hdmi to the avr in the rack) and it tried to knock the audio to 2 channel because of the display. The cool thing with JAP is you can set what EDID to use.
|
BlackWire Designs |
|
OP | Post 5 made on Wednesday March 1, 2017 at 16:51 |
3PedalMINI Loyal Member |
Joined: Posts: | July 2009 7,860 |
|
|
On March 1, 2017 at 16:04, BlackWire Designs said...
JAP Receiver on each SS AVR JAP Receiver on each display
Why do you want to go out of the AVR in the first place? So in that case you are only using the jap as the audio? I would do it the way in my OP just to prevent audio delay issues..
|
The Bitterness of Poor Quality is Remembered Long after the Sweetness of Price is Forgotten! - Benjamin Franklin |
|
Post 6 made on Wednesday March 1, 2017 at 19:25 |
FP Crazy Super Member |
Joined: Posts: | June 2003 2,940 |
|
|
What be wrong with running the JAP receiver to the AVR and then hdmi out of the AVR to the display?
I am starting my first JAP system where I hoped to do this. TS indicated I could do this.
My system will be very large. 3 ea 24 port Luxul stacked switches, 12 sources, 21-23 displays
|
Chasing Ernie's post count, one useless post at a time. |
|
Post 7 made on Wednesday March 1, 2017 at 21:05 |
Fins Elite Member |
Joined: Posts: | June 2007 11,627 |
|
|
On March 1, 2017 at 19:25, FP Crazy said...
What be wrong with running the JAP receiver to the AVR and then hdmi out of the AVR to the display?
I am starting my first JAP system where I hoped to do this. TS indicated I could do this.
My system will be very large. 3 ea 24 port Luxul stacked switches, 12 sources, 21-23 displays My thought on this would be, is HDBaseT and JAP both equally reliable? What little I know about JAP (unfortunately I've never used it), it seems more reliable than any of the point to point extender options. Another possible reason, how does a pair of HDBaseT extenders compare in price to a JAP receiver?
|
Civil War reenactment is LARPing for people with no imagination.
|
|
Post 8 made on Wednesday March 1, 2017 at 21:15 |
Mac Burks (39) Elite Member |
Joined: Posts: | May 2007 17,518 |
|
|
Extender --->AVR--->Display is the only way to get your AVR's on screen display...displaying on screen.
|
Avid Stamp Collector - I really love 39 Cent Stamps |
|
Post 9 made on Wednesday March 1, 2017 at 21:31 |
Fins Elite Member |
Joined: Posts: | June 2007 11,627 |
|
|
On March 1, 2017 at 21:15, Mac Burks (39) said...
Extender --->AVR--->Display is the only way to get your AVR's on screen display...displaying on screen. What customer needs the display on screen? Half of my clients complain about volume and inputs popping up on screen.
|
Civil War reenactment is LARPing for people with no imagination.
|
|
Post 10 made on Wednesday March 1, 2017 at 22:19 |
Stryker Long Time Member |
Joined: Posts: | November 2010 402 |
|
|
JAP to AVR to Endpoint
|
"If they give you ruled paper, write the other way" |
|
Post 11 made on Wednesday March 1, 2017 at 23:55 |
imt Long Time Member |
Joined: Posts: | June 2007 466 |
|
|
I think based on what 3pedal said that is his intention. Just using HDbaseT from Reveiver -> endpoint versus HDMI. Assuming Equip is in a rack and display not close and 4K.
Curious on Blackwire designs response about any sync issues with what he proposed above using receivers at both the receiver and displays so receivers output is just for video and TV gets direct video. the cost difference between a JAp receiver vs 3Pedal's use of the HDbaseT transmitter & receiver would be close.
Curious what the sources happen to be in the setup In that they are shared w/transmitter vs fixed/duplicated for each AVR. The latter would then just require JAP from the AVR to Display.
|
|
Post 12 made on Thursday March 2, 2017 at 07:59 |
vwpower44 Super Member |
Joined: Posts: | August 2004 3,662 |
|
|
I just did this with three AVR's in a rack. We did 3G Hifi Tx and the 3g Rx going into each receiver. All of the equipment sources and AVR's were in the rack. I was able to use a 30' Etehereal HDMI from the AVR to one TV, the other TV I used a 50' Etehereal HDMI, then the other TV required a 100' run. For this we used the 3gtx and 3grx as a point to point. Everything works great. I figured if I need 4k, then I would just put the accelerators on the two HDMI cables, but the Amazon 4k on the roku worked fine.
|
Stay Hungry, Stay Foolish... |
|
Post 13 made on Thursday March 2, 2017 at 11:58 |
goldenzrule Loyal Member |
Joined: Posts: | July 2007 8,474 |
|
|
On March 1, 2017 at 21:31, Fins said...
What customer needs the display on screen? Half of my clients complain about volume and inputs popping up on screen. Considering a lot of AVR's have on screen menu's only, just for setup and maintenance it is pretty important. Of course you can plug your test monitor right into an AVR, but when setting the soundstage up manually, you really have to be in the room.
|
|
Post 14 made on Thursday March 2, 2017 at 13:39 |
lippavisual Senior Member |
Joined: Posts: | December 2007 1,463 |
|
|
Easily accomplished by unplugging a single source and routing the AVR output to the transmitter and selecting that source for setting up AVR.
|
|
|
Post 15 made on Friday March 3, 2017 at 12:57 |
vwpower44 Super Member |
Joined: Posts: | August 2004 3,662 |
|
|
On March 2, 2017 at 13:39, lippavisual said...
Easily accomplished by unplugging a single source and routing the AVR output to the transmitter and selecting that source for setting up AVR. I can't believe I didn't think about this. Putting a transmitter on the AVR, and put the Receiver on the input of the AVR. Then the Receiver at the TV could select inputs, as well as the receiver. Same amount of parts, but I feel like this is a better solution. I just used the JAP as a point to point 4k connection.
|
Stay Hungry, Stay Foolish... |
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|