Post 1 made on Wednesday February 8, 2017 at 03:12 |
dsp81 Advanced Member |
Joined: Posts: | October 2007 782 |
|
|
I have a client with a small office that needs two sources going to two zones (HDMI feeding the TVs, analog audio feeding ceiling speakers). I spec'd a Sony STR-DN1070 because it has two HDMI outs. I've been programming the remotes (URC) and can't seem to find any codes for what Sony calls the "HDMI zone." The URC database doesn't seem to have much and I couldn't find anything on the Interwebs, either.
Previous models had a dedicated Z2 HDMI output that followed the Z2 input (like the DN1050). This model has A/B outputs and the B output can be assigned to "HDMI zone." Changing the Z2 source doesn't affect the HDMI zone with the DN1070. You can set the HDMI zone to "source" in the GUI but that follows the zone 1 source. You can change the HDMI zone in the GUI but you have to do it from zone 1 display. You can also change it with the Zone Select button and wheel on the AVR but that's not so convenient from the other room.
Am I missing something? Anyone know if there is discrete IR for the HDMI zone?
|
|
Post 2 made on Wednesday February 8, 2017 at 11:33 |
Impaqt RC Moderator |
Joined: Posts: | October 2002 6,233 |
|
|
From the Manual
Set the assignment for the HDMI OUT B/HDMI ZONE jack to [Zone]. Press HOME, then select [Setup] – [HDMI Settings] – [HDMI Out B Mode] – [Zone]
|
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.