|
|
|
Custom Installers' Lounge Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
Topic: | Roku 3 This thread has 10 replies. Displaying all posts. |
|
Post 1 made on Friday January 27, 2017 at 22:15 |
BRIAN PHOENIX Long Time Member |
Joined: Posts: | August 2015 88 |
|
|
I am running a Roku 3 into the HDMI input of a Samsung 4k ku6300 TV. I am taking the toslink digital audio out of the tv and running it into a digital audio input on my Denon 3803 receiver. The question I have is this... If the stream being output from the Roku 3 is in true 5.1 Dolby Digital, and I have the Denon receiver surround mode set to Dolby Digital will my audio out of the Denon be playing true 5.1 Dolby Digital sound? Thanks for the answer.
|
|
Post 2 made on Friday January 27, 2017 at 22:54 |
highfigh Loyal Member |
Joined: Posts: | September 2004 8,322 |
|
|
On January 27, 2017 at 22:15, BRIAN PHOENIX said...
I am running a Roku 3 into the HDMI input of a Samsung 4k ku6300 TV. I am taking the toslink digital audio out of the tv and running it into a digital audio input on my Denon 3803 receiver. The question I have is this... If the stream being output from the Roku 3 is in true 5.1 Dolby Digital, and I have the Denon receiver surround mode set to Dolby Digital will my audio out of the Denon be playing true 5.1 Dolby Digital sound? Thanks for the answer. You're going to need to go to the Roku menu for that answer.
|
My mechanic told me, "I couldn't repair your brakes, so I made your horn louder." |
|
Post 3 made on Friday January 27, 2017 at 23:15 |
tweeterguy Loyal Member |
Joined: Posts: | June 2005 7,713 |
|
|
It depend; some TVs only output surround from their internal apps, not external source inputs. Check the TV documentation to see if it states this.
|
|
Post 4 made on Friday January 27, 2017 at 23:23 |
tweeterguy Loyal Member |
Joined: Posts: | June 2005 7,713 |
|
|
From crutchfield for your model:
"optical digital audio output (can pass Dolby® Digital/DTS multichannel or 2-channel audio from connected sources)"
|
|
Post 5 made on Saturday January 28, 2017 at 00:24 |
iform Advanced Member |
Joined: Posts: | September 2010 760 |
|
|
Dolby TrueHD or DTS HD MA can only be had via HDMI. Go from the Roku to the receiver, then to the tv.
|
|
Post 6 made on Saturday January 28, 2017 at 02:07 |
Ernie Gilman Yes, That Ernie! |
Joined: Posts: | December 2001 30,104 |
|
|
You say you are running it, so look at the Denon's display and count the little speaker icons.
|
A good answer is easier with a clear question giving the make and model of everything. "The biggest problem in communication is the illusion that it has taken place." -- G. “Bernie” Shaw |
|
Post 7 made on Saturday January 28, 2017 at 13:16 |
FrogAV Long Time Member |
Joined: Posts: | March 2012 419 |
|
|
On January 28, 2017 at 02:07, Ernie Gilman said...
You say you are running it, so look at the Denon's display and count the little speaker icons. And/or, start the source material streaming and put the Denon in "auto" surround mode. The display should change to tell you. If it says "Dolby Surround" or whatever, yes. If it says something like "Pro Logic" or another simulated surround, nope.
|
Ryan Posner Frog AV |
|
Post 8 made on Saturday January 28, 2017 at 13:37 |
Brad Humphrey Super Member |
Joined: Posts: | February 2004 2,602 |
|
|
Since most of the popular services steam Dolby Digital+ ... and the TV doesn't say it with decode DD+ to DD for the optical output ... I'm going to assume he's asking because he's only getting 2ch to the Denon from the TV.
The Denon 3803 does not have HDMI connections (iform).
Brian, what you need is the new Roku Ultra. It has an optical output that does output 5.1 for those services (unlike the older Roku4's optical output). Or buy a new audio receiver - new Roku is much cheaper.
|
|
OP | Post 9 made on Saturday January 28, 2017 at 14:43 |
BRIAN PHOENIX Long Time Member |
Joined: Posts: | August 2015 88 |
|
|
Thanks for the help everyone. Question based on the answer from Mr. Ryan Posner... Does this mean when my Denon 3803 receiver is set to the "auto" surround mode the receiver automatically puts itself into the proper surround sound mode based soley on the audio signal it is seeing?
|
|
Post 10 made on Saturday January 28, 2017 at 14:51 |
Ernie Gilman Yes, That Ernie! |
Joined: Posts: | December 2001 30,104 |
|
|
"auto" = automatically, yes
Does anybody know of any exceptions to this?
|
A good answer is easier with a clear question giving the make and model of everything. "The biggest problem in communication is the illusion that it has taken place." -- G. “Bernie” Shaw |
|
Post 11 made on Saturday January 28, 2017 at 18:14 |
MNTommyBoy Senior Member |
Joined: Posts: | November 2010 1,064 |
|
|
Let's keep in mind that the "auto" function will provide the best format that said receiver from 2004 will give someone.
This will also depend on the source material.
This will also depend on what the Samsung will output, may depend on the day.
Based on what you're concerned with, I would recommend moving into a new receiver with HDMI capability (for the best surround formats) and one of the revamped rokus for expanded 4k capability on your 4k TV.
|
"There's a big difference between winging it and seeing what happens. Now let's see what happens." ~MacGruber |
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|