| Post 1 made on Thursday June 13, 2002 at 13:47 |
Pete Dunnill Founding Member |
|
|
Problem with automating a home cinema system through a pronto with a HT200DM with interface cable. To pick up the inputs on the interface box and cable you have to press the AV button twice to get onto the second page. With the Sim2 remote this happens every time with no issues, but with the pronto the first page sticks and only with repeated pressing of the button does the second page come up. As you can imagine this makes automating the process very difficult, as the number of presses is not consistant. Can anyone help please
|
|
| Post 2 made on Thursday June 13, 2002 at 16:06 |
haav Founding Member |
Joined:
Posts: | August 2001
170 |
|
|
Toggle-bit problem, maybe, if you have different codes for the same buttom. Paste the codes.
|
|
| Post 3 made on Saturday June 15, 2002 at 22:48 |
ngavchris Founding Member |
Joined:
Posts: | March 2002
103 |
|
|
Pete,
I may be wrong, But you should be able to just press the number of the input you want and it should change the RC12 to that input. I will try on our demo unit and check the post for your reply.
|
|
| Post 4 made on Sunday June 16, 2002 at 13:01 |
kabster Founding Member |
Joined:
Posts: | July 2001
1,606 |
|
|
Try getting it consistant then make a macro ?
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
