| Post 1 made on Tuesday January 10, 2017 at 23:27 |
cshepard Advanced Member |
Joined:
Posts: | June 2008
767 |
|
|
I'm setting up Luxul's wireless bridge kit, the XWO-BKT1. When sold as a kit both APs are preconfigured in bridge mode on 5G and as an access point on 2.4G. I was reading that Luxul recommends that this configuration is preferred for a wireless bridge up to 500 meters; beyond that distance they suggest setting up the bridge on the 2.4G. I'll be bridging between a barn and a gate at a distance of almost half a mile (right around 800 meters if I had to guess). I'm sure it will come down to me just testing it, but does anyone have any experience with switching bands with this setup?
|
Chris |
|
| OP | Post 2 made on Wednesday January 11, 2017 at 22:44 |
cshepard Advanced Member |
Joined:
Posts: | June 2008
767 |
|
|
If anyone cares, I switched the bridging to 2.4GHz & all is good.
|
Chris |
|
| Post 3 made on Wednesday January 11, 2017 at 23:29 |
2.4 def has better range. With high gain antennas you can send it a long way. I setup one shooting 5 miles line of site on ubiquiti. Been working solid with high throughput for years.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
