So I know there is a similar thread but I need to get some recommendations, the install is Tuesday.
We are doing wall mounting two OLED55B6P's both with Sonos Playbars mounted below. In researching it seems the only mount that can be used without having to really modify one is the LG mount. Can anyone confirm? OR better yet give a better option as a Playbar will be below.
I had planned on using a Sanus LL22B which is my go to. I love being able to "lower" the TV down (with upper allens) to take up the gap between the TV and Playbar.
Any recommendations or point me in the right direction would be greatly appreciated.

I've done a few of the LG OLED's with SONOS and HEOS soundbars.
Your best bet(if it's not an articulating mount} is to mount the TV,put some painters tape on the wall and mark the bottom of the TV.
Remove the TV,mount the speaker bar,and re-install the TV.

If it's an articulating mount,fabricating your own speaker mounts off the bottom holes on the TV is really your only option.

I usually modify our left over rack shelve clamp down brackets for that.

Unless your good at fabricating,it's wise to use there mount.
It's a pretty goofy situation.

Which mount do you recommend? They're NOT articulating, only flat wall mount. I found an articulating on LG's site but not a standard wall mount.

[Link: lg.com]

I also found an adapter made by Peerless, not sure how this even mount??

[Link: amazon.com]

Thanks for your input.....really appreciate it!!

I installed a couple 55b6p and 1 65b6p. Used peerless SF650 for flat and Audio Solutions ASFM64 for a small amount of articulation. I don't know if your Sanuns mount will work. It looks like it may be a little too tall. The peerless mount worked great and I ended up cutting the arms and moving them down below the bump out on the back of the TV because it was in a high traffic area where you could see the side of the TV. I left them unmodified on another TV and it looked fine.