|
|
 |
|
The following page was printed from RemoteCentral.com:
| Topic: | DISH Hopper/Joey IR This thread has 8 replies. Displaying all posts. |
|
| Post 1 made on Thursday June 30, 2016 at 20:04 |
Slimfoot Select Member |
Joined:
Posts: | October 2003
1,562 |
|
|
1. Do the Hopper and Joey respond to IR?
2. Are the codes in the URC DB working codes?
3. Does the Joey remote communicate with the Joey or the Hopper?
I haven't done any DISH network components in many years, so that is the reason for so many questions. Thanks in advance.
|
Sir, my concern is not whether God is on our side; my greatest concern is to be on God's side, for God is always right.
Abraham Lincoln
|
|
| Post 2 made on Thursday June 30, 2016 at 20:16 |
goldenzrule Loyal Member |
Joined:
Posts: | July 2007
8,474 |
|
|
|
| OP | Post 3 made on Friday July 1, 2016 at 04:13 |
Slimfoot Select Member |
Joined:
Posts: | October 2003
1,562 |
|
|
On June 30, 2016 at 20:16, goldenzrule said...
1. Yes
2. Yes
3. Joey Thanks for the fast response. Are there any distance issues with the Joey as far as length of RG6? Possible install where Hopper and Joey are 150 feet apart.
|
Sir, my concern is not whether God is on our side; my greatest concern is to be on God's side, for God is always right.
Abraham Lincoln
|
|
| Post 4 made on Friday July 1, 2016 at 05:58 |
Brad Humphrey Super Member |
Joined:
Posts: | February 2004
2,598 |
|
|
150 feet would depend on the cable:
Over RG11, no problem.
Over good solid copper, quad shield, sweep tested, RG6 - shouldn't be a problem either.
Using existing house cable some random electrician put in (copper-clad-steel, 40% braid, RG59); almost guaranteed to have problems.
|
|
| OP | Post 5 made on Friday July 1, 2016 at 09:14 |
Slimfoot Select Member |
Joined:
Posts: | October 2003
1,562 |
|
|
On July 1, 2016 at 05:58, Brad Humphrey said...
150 feet would depend on the cable:
Over RG11, no problem.
Over good solid copper, quad shield, sweep tested, RG6 - shouldn't be a problem either.
Using existing house cable some random electrician put in (copper-clad-steel, 40% braid, RG59); almost guaranteed to have problems. Dual shield RG6, same specs.
|
Sir, my concern is not whether God is on our side; my greatest concern is to be on God's side, for God is always right.
Abraham Lincoln
|
|
| Post 6 made on Friday July 1, 2016 at 11:57 |
Ernie Gilman Yes, That Ernie! |
Joined:
Posts: | December 2001
30,104 |
|
|
On June 30, 2016 at 20:04, Slimfoot said...
1.
2. Are the codes in the URC DB working codes?
3. I've tried to set up an MX850, which I think uses a different database, and none of the eight sets of codes (Dish #1 through Dish #8) worked. What is THE NAME of the working code set for Joeys that's in the URC DB? I haven't done any DISH network components in many years, so that is the reason for so many questions. Thanks in advance. I've never done any dish component work before this client, so, yeah, thanks for answers!
|
A good answer is easier with a clear question giving the make and model of everything.
"The biggest problem in communication is the illusion that it has taken place." -- G. “Bernie” Shaw |
|
| OP | Post 7 made on Wednesday September 20, 2017 at 19:05 |
Slimfoot Select Member |
Joined:
Posts: | October 2003
1,562 |
|
|
I started this thread a year ago and now I can't remember if something needs to be enabled in the Joey menu in order to receive IR from MX-890. Some help please.
|
Sir, my concern is not whether God is on our side; my greatest concern is to be on God's side, for God is always right.
Abraham Lincoln
|
|
| Post 8 made on Wednesday September 20, 2017 at 19:27 |
bricor Advanced Member |
Joined:
Posts: | March 2006
902 |
|
|
Yes, you have to enable IR in the remote control section of the menu for it to receive IR.
URC codeset #1 worked fine for me last week.
|
|
| OP | Post 9 made on Wednesday September 20, 2017 at 19:42 |
Slimfoot Select Member |
Joined:
Posts: | October 2003
1,562 |
|
|
On September 20, 2017 at 19:27, bricor said...
Yes, you have to enable IR in the remote control section of the menu for it to receive IR.
URC codeset #1 worked fine for me last week. Thank you for the fast reply.
|
Sir, my concern is not whether God is on our side; my greatest concern is to be on God's side, for God is always right.
Abraham Lincoln
|
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
