Your Universal Remote Control Center
RemoteCentral.com
Custom Installers' Lounge Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
HDBASE-T receiver to use with Integra DTR-50.7
This thread has 5 replies. Displaying all posts.
Post 1 made on Friday May 20, 2016 at 10:50
Krassyg
Long Time Member
Joined:
Posts:
April 2005
264
Any of you guys use the HDBASE-T output of Integra? I need to find one that can handle UHD and HDCP 2.2 for about 50'. I'm very impressed with the new Atlona stuff but I'm not sure if it will play nice with Integra.
Post 2 made on Friday May 20, 2016 at 14:34
ChrisDeHart
Lurking Member
Joined:
Posts:
December 2009
6
I wouldn't use the built-in HDBaseT transmitter in the receiver, I have had problems with HDCP and snow when using a 4k HDBaseT receiver only with that Integra, use a matched transmitter and receiver.  I use the Binary 520 series and have had good luck.
Post 3 made on Friday May 20, 2016 at 19:20
cgav
Select Member
Joined:
Posts:
September 2009
1,568
Without a doubt, you will not get the full 4k spectrum with an HDBaseT balun. Maybe a crippled, version. HDR 10 bit requires a full 18Gbps, which is IMPOSSIBLE with HDBaseT. Impossible. Someone (most likely a salesman) will tell you otherwise, but it's not true. The ONLY WAY you will get the best possible image is to use an 18Gbps certified cable from receiver to display and 18Gbps interconnects.
Post 4 made on Friday May 20, 2016 at 20:07
PeterN
Active Member
Joined:
Posts:
July 2008
546
The Integra output doesn't power the RX end so you still need some piece to do that. Basically might as well use a full HDBaseT extender set in that case.
Post 5 made on Monday May 23, 2016 at 10:42
jrainey
Active Member
Joined:
Posts:
September 2010
632
On May 20, 2016 at 19:20, cgav said...
Without a doubt, you will not get the full 4k spectrum with an HDBaseT balun. Maybe a crippled, version. HDR 10 bit requires a full 18Gbps, which is IMPOSSIBLE with HDBaseT. Impossible. Someone (most likely a salesman) will tell you otherwise, but it's not true. The ONLY WAY you will get the best possible image is to use an 18Gbps certified cable from receiver to display and 18Gbps interconnects.

^^^^ This. What is your UHD source to display?
Jack Rainey - Full disclosure...reformed integrator, now mid-Atlantic manufacturers rep for: Integra, Paradigm, Anthem, Parasound, Atlona, LG TV's and Metra Home Theater...among others
Post 6 made on Monday May 23, 2016 at 11:36
brent mccall
Long Time Member
Joined:
Posts:
May 2004
181
On May 20, 2016 at 19:20, cgav said...
Without a doubt, you will not get the full 4k spectrum with an HDBaseT balun. Maybe a crippled, version. HDR 10 bit requires a full 18Gbps, which is IMPOSSIBLE with HDBaseT. Impossible. Someone (most likely a salesman) will tell you otherwise, but it's not true. The ONLY WAY you will get the best possible image is to use an 18Gbps certified cable from receiver to display and 18Gbps interconnects.

Great answer:
The only way to get HDR on an HDBaseT system is at 4:2:0, 8 Bit (and the most very recent HDBaseT firmware). This can also be pushed over Redmere (in THEORY), but I would NOT suggest trying as you will be left behind quickly.
Brent McCall
Envy, it is a dirty emotion.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse