|
|
|
Custom Installers' Lounge Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
70v speaker and HDBT in the same 1"...
| |
|
Topic: | 70v speaker and HDBT in the same 1" conduit? This thread has 3 replies. Displaying all posts. |
|
Post 1 made on Monday May 16, 2016 at 16:46 |
FP Crazy Super Member |
Joined: Posts: | June 2003 2,940 |
|
|
Anyone done this successfully? Success being NO hdmi issues, bleed over, etc?
|
Chasing Ernie's post count, one useless post at a time. |
|
Post 2 made on Monday May 16, 2016 at 17:54 |
MikeZTC Senior Member |
Joined: Posts: | June 2007 1,325 |
|
|
Purists will scream and yell, but I have about 200 rooms with two HDBT inputs, two HDBT outputs and a 45W 70V cable bundled together for at least 10' with no issues. The real question is how long are the runs in proximity and how much power is being drawn from the speaker circuit...
|
MikeZTC, CTS-D, CTS-I, DMC-E |
|
Post 3 made on Monday May 16, 2016 at 18:18 |
Brad Humphrey Super Member |
Joined: Posts: | February 2004 2,593 |
|
|
It is a tuff one to say.
I've seen cat5 cable that someone installed with a bundle of Romex, wrapping around it, going thru the same holes, the entire run of cable (about 40-50 feet). Put a cheap HDBaseT extender on it and it worked fine.
Then I have a house I'll prewire with Cat6, keeping it away from everything, put in a good HDBaseT extender (tried a couple of good brands)... and every time the customer turns the lights on/off the picture blanks for a few seconds. *facepalm*!!!
I wouldn't think a 70V system would cause you any problems. But it's HDMI so....
|
|
Post 4 made on Monday May 16, 2016 at 18:28 |
highfigh Loyal Member |
Joined: Posts: | September 2004 8,320 |
|
|
I have seen problems with 70V in proximity to line/mic level audio that was laying over a ceiling. Any time I have a choice, I keep cables with high impedance or weak signals separate from higher voltage or current.
|
My mechanic told me, "I couldn't repair your brakes, so I made your horn louder." |
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|