|
|
|
The following page was printed from RemoteCentral.com:
Apple TV remote control question
| |
|
Topic: | Apple TV remote control question This thread has 20 replies. Displaying posts 1 through 15. |
|
Post 1 made on Tuesday November 24, 2015 at 17:58 |
Ernie Gilman Yes, That Ernie! |
Joined: Posts: | December 2001 30,104 |
|
|
Is the new Apple TV able to be controlled by both IR and IP, without choosing just one or the other? By "new" I mean Model A1625.
Thanks.
|
A good answer is easier with a clear question giving the make and model of everything. "The biggest problem in communication is the illusion that it has taken place." -- G. “Bernie” Shaw |
|
Post 2 made on Tuesday November 24, 2015 at 19:07 |
tweeterguy Loyal Member |
Joined: Posts: | June 2005 7,713 |
|
|
As of a week ago, no IP. IR does work.
|
|
Post 3 made on Tuesday November 24, 2015 at 22:54 |
Impaqt RC Moderator |
Joined: Posts: | October 2002 6,230 |
|
|
as of today, no IP control.
|
|
|
Post 4 made on Wednesday November 25, 2015 at 08:19 |
andrewinboulder Select Member |
Joined: Posts: | August 2003 1,518 |
|
|
Be aware: I've had some funny quirks with the control of IR on the newer Apple TV's. While I was able to swap out my Apple TV III for the new model at home with no changes in programming (using Control4), I've had two customers with URC remotes where the original pause/play commands don't quite work from the CCP URC database.
You can navigate and select just fine off the menu, but once the video starts, you can't pause/play in certain apps like Netflix. The only way I could get it to work correctly was to use a previous gen Apple TV remote that has IR and learn the pause/play command into the remote.
This cost me a service call since I hadn't bothered to test pause/play in Netflix.
Thought it was a fluke but had to do it two more times with a customer who had MX-890's.
|
|
Post 5 made on Wednesday November 25, 2015 at 09:01 |
thecynic315 Senior Member |
Joined: Posts: | August 2008 1,001 |
|
|
On November 25, 2015 at 08:19, andrewinboulder said...
....I've had two customers with URC remotes where the original pause/play commands don't quite work from the CCP URC database. I've had the same issue with GEN 2 ATVs & URC. I think their Play/Pause code is just bad. As of today you can only control a Gen 4 ATV with IR, Apple turned off HID so can't emulate a kb with bluetooth, no IP control without breaking laws in the DMCA.
|
|
Post 6 made on Wednesday November 25, 2015 at 09:40 |
Duct Tape Loyal Member |
Joined: Posts: | November 2008 5,298 |
|
|
if you can still teach IR codes to the appletv you are better off going that route. this opens up additional transport functions (skip +, skip -, fast fwd, rew, etc)
add an old dvd player to your remote control project and use those codes to teach to the atv.
|
|
|
Post 7 made on Wednesday November 25, 2015 at 10:21 |
andrewinboulder Select Member |
Joined: Posts: | August 2003 1,518 |
|
|
When using an apple TV remote, how are you spitting out FF vs skip forward?
|
|
OP | Post 8 made on Wednesday November 25, 2015 at 13:02 |
Ernie Gilman Yes, That Ernie! |
Joined: Posts: | December 2001 30,104 |
|
|
I wrote the question out on my phone and I missed an important detail.
I thought there was doubt when this Apple TV came out as to whether it could be controlled by IR, and people found yes, it could be. Doesn't that mean the alternative was IP? Did IP control of this never work, or work and then stop?
Thanks.
|
A good answer is easier with a clear question giving the make and model of everything. "The biggest problem in communication is the illusion that it has taken place." -- G. “Bernie” Shaw |
|
Post 9 made on Wednesday November 25, 2015 at 13:20 |
tweeterguy Loyal Member |
Joined: Posts: | June 2005 7,713 |
|
|
IP didn't work in the beginning. It didn't work a week ago. It didn't work last night. Guess what, it doesn't work today. Will it work tomorrow? Are you a hacker?
|
|
Post 10 made on Wednesday November 25, 2015 at 13:23 |
floydbob Long Time Member |
Joined: Posts: | November 2004 66 |
|
|
There was IP control, as long as you consider the Apple Remote App on your phone to be IP control.
I haven't looked in a couple of weeks but when it came out the new ATV didn't even support the Apple remote app.
|
|
Post 11 made on Wednesday November 25, 2015 at 13:26 |
tweeterguy Loyal Member |
Joined: Posts: | June 2005 7,713 |
|
|
On November 25, 2015 at 13:23, floydbob said...
There was IP control, as long as you consider the Apple Remote App on your phone to be IP control.
I haven't looked in a couple of weeks but when it came out the new ATV didn't even support the Apple remote app. He's questioning gen4. I'm replying in regards to gen4. Yes of course control via the Remote app worked on previous versions; it does not on gen4.
|
|
Post 12 made on Wednesday November 25, 2015 at 16:36 |
thecynic315 Senior Member |
Joined: Posts: | August 2008 1,001 |
|
|
On November 25, 2015 at 13:02, Ernie Gilman said...
I wrote the question out on my phone and I missed an important detail.
I thought there was doubt when this Apple TV came out as to whether it could be controlled by IR, and people found yes, it could be. Doesn't that mean the alternative was IP? Did IP control of this never work, or work and then stop?
Thanks. It was IR Vs Bluetooth as the new remote is Bluetooth. Result-yes IR also works. The conversation then moved to arguments over where the IR receiver was on the device. Result - center point on front face. Now it is which IR code set works. Result - Gen1/2/3 seem to work with Gen4 I found doing a URC MX-900 today that AUX->Apple-> last code set on list (forget name) worked without problems
|
|
Post 13 made on Thursday November 26, 2015 at 01:46 |
tomciara Loyal Member |
Joined: Posts: | May 2002 7,962 |
|
|
URC 476 for reference has been the IR code set forever.
|
There is no truth anymore. Only assertions. The internet world has no interest in truth, only vindication for preconceived assumptions. |
|
Post 14 made on Monday November 30, 2015 at 08:45 |
mrtristan Select Member |
Joined: Posts: | October 2003 1,634 |
|
|
Can anyone confirm the working distance of stock Blutooth remote? Just want to know how far I could install the unit away from TV and still have the stock remote work.
|
|
Post 15 made on Monday November 30, 2015 at 09:01 |
modom Long Time Member |
Joined: Posts: | November 2003 352 |
|
|
I don't know if it was a fluke, but we were getting Bluetooth control at about 20 feet from the AppleTV and through a double pane window. Your mileage may vary.
|
Mark |
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|