Post 1 made on Saturday November 7, 2015 at 09:18 |
3PedalMINI Loyal Member |
Joined: Posts: | July 2009 7,860 |
|
|
Whats integration for this? is it RS232 or IP? if so what do i need to tell the security guy to install in his panel so I can control it?
Can I program the doorstation with the keypad to disarm the security system?
|
The Bitterness of Poor Quality is Remembered Long after the Sweetness of Price is Forgotten! - Benjamin Franklin |
|
Post 2 made on Saturday November 7, 2015 at 09:45 |
Impaqt RC Moderator |
Joined: Posts: | October 2002 6,229 |
|
|
you'll need the 4232CBM Connected Building Module for the panel.(rs-232)
there should be a brand new driver for the 20 any day now. They have been talking about it for a while.
|
|
|
Post 3 made on Saturday November 7, 2015 at 10:28 |
iimig Senior Member |
Joined: Posts: | April 2011 1,154 |
|
|
An easy way to do it would be to program Vista 20P zone 7 for keyswitch, which allows a contact closure (usually from an access control system but in this case from the Control4 controller) to disarm the system. On the Control4 side programming would be very simple, when such and such code is used on the door station, close whatever relay on the controller.
|
The less I say, the smarter I will appear |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.