Post 1 made on Sunday June 2, 2002 at 22:26 |
Troy Stuckey Founding Member |
|
|
I have A VSX37tx and a TSU6000 With the RF Extender.
First Question:
will the Flasher outputs on the RF extender connect to the multi room control in of the VSX37TX, and pass codes.
Second question:
Are there discrete codes for the multi room commands
If anyone can help me with this situation I would appreciate it Thanks in advance Troy
|
|
Post 2 made on Sunday June 2, 2002 at 23:34 |
I haven't used the outputs of the RF extender to connect into the multi-in, but I have used a flasher output from a Xantech kit (291-kit) and plugged it straight into the multi-in on the receiver and it worked fine. The codes are the same as the normal "main room" codes. The only difference is whether the receiver picks it up on it's front IR receiver or through that back port.
I had to use two different IR kits/receivers in order to separate the main room stuff from the commands coming in from around the house....not sure on how you're planning on using the RF extender but if you're also using it for the main room controls then you need to make sure that you'll be able to send commands ONLY to the back port.
Hope that made sense......let us know how you hook it up.
Nick
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.