|
|
|
Custom Installers' Lounge Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
Need help with HDBase T extender setup
| |
|
Topic: | Need help with HDBase T extender setup This thread has 7 replies. Displaying all posts. |
|
Post 1 made on Tuesday August 18, 2015 at 17:50 |
Slimfoot Select Member |
Joined: Posts: | October 2003 1,562 |
|
|
Need help with HDBase T extender setup. Customer has DirecTV with Yamaha AVR and Samsung TV. Channel changing is slow with a ten second black screen and then the no signal screen appears from the TV and audio and video finally display. Firmware is current on TV. Re terminated CAT5e and not using EZ-RJ45 connectors. Also tried Binary splitter to no avail. What am I missing here? Thanks in advance. Yamaha RX-A740 Binary B-500-EXT-230-RS Binary B-220-HDSPLTR-1x2 DirectTV HR-44 Samsung UN55JU650DF
|
Sir, my concern is not whether God is on our side; my greatest concern is to be on God's side, for God is always right. Abraham Lincoln
|
|
Post 2 made on Tuesday August 18, 2015 at 18:26 |
jesterselv Long Time Member |
Joined: Posts: | August 2009 288 |
|
|
Changing any channel? or changing channels showing different resolutions?
|
"Those who sacrifice liberty For security deserve neither." - Benjamin Franklin |
|
Post 3 made on Tuesday August 18, 2015 at 18:55 |
Indigo Select Member |
Joined: Posts: | January 2008 2,040 |
|
|
Set DTV to 1080i output only.
|
|
OP | Post 4 made on Tuesday August 18, 2015 at 20:37 |
Slimfoot Select Member |
Joined: Posts: | October 2003 1,562 |
|
|
On August 18, 2015 at 18:26, jesterselv said...
Changing any channel? or changing channels showing different resolutions? Any channel.
|
Sir, my concern is not whether God is on our side; my greatest concern is to be on God's side, for God is always right. Abraham Lincoln
|
|
OP | Post 5 made on Tuesday August 18, 2015 at 20:38 |
Slimfoot Select Member |
Joined: Posts: | October 2003 1,562 |
|
|
On August 18, 2015 at 18:55, Indigo said...
Set DTV to 1080i output only. I will try that, thank you.
|
Sir, my concern is not whether God is on our side; my greatest concern is to be on God's side, for God is always right. Abraham Lincoln
|
|
OP | Post 6 made on Wednesday August 19, 2015 at 18:04 |
Slimfoot Select Member |
Joined: Posts: | October 2003 1,562 |
|
|
Tried the 1080i setting, no difference. Replaced TV with Samsung UN55JS700DF. Much better, channel changing now about four seconds. Still get the no signal screen every now and then. Replaced the extender with a Zektor SoloCat, problem solved. Nothing against the Binary product, have several in the field. Thanks again for the responses.
|
Sir, my concern is not whether God is on our side; my greatest concern is to be on God's side, for God is always right. Abraham Lincoln
|
|
Post 7 made on Wednesday August 19, 2015 at 23:01 |
24/7 Senior Member |
Joined: Posts: | April 2008 1,244 |
|
|
On Comcrap cable boxes, the default is set to "pass-through". It always causes a delay so I reset the boxes to 1080i (which you have done with your DTV box.).
I think Directv also has a setting "native", but I don't remember for sure. FWIW, check this setting as it may be causing the delay ...
|
|
|
Post 8 made on Thursday August 20, 2015 at 05:23 |
Indigo Select Member |
Joined: Posts: | January 2008 2,040 |
|
|
Just remember there was video issue with Yamaha RX-A850 and Wyrestorm Single Coax 75. I have to set Video as Processed on Yamaha. Otherwise, I won't get any analog channels at all.
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|