|
|
|
The following page was printed from RemoteCentral.com:
Topic: | SnapAV Binary HDBaseT This thread has 28 replies. Displaying posts 1 through 15. |
|
Post 1 made on Thursday April 30, 2015 at 11:14 |
Recently I've been having issues with Vanco Evolution and Wyrestorm brand HDMI Extenders and have been considering the Binary line, but wanted some input.
Has anyone had any issues with the Snap AV stuff yet? How long have you had it installed??
Thanks
Frank
|
|
Post 2 made on Thursday April 30, 2015 at 12:24 |
iimig Senior Member |
Joined: Posts: | April 2011 1,154 |
|
|
The ONLY issue I have ever seen is when you are running IR through the extender from a control system to the display, I have seen the emitters lock up where they won't stop glowing. Unplug the RX end and it goes back to normal.
Besides that they seem to be rock solid. Oldest installs are about 1.5 years old.
|
The less I say, the smarter I will appear |
|
Post 3 made on Thursday April 30, 2015 at 12:45 |
Fins Elite Member |
Joined: Posts: | June 2007 11,627 |
|
|
I don't understand why people use anything besides Ethereal.
|
Civil War reenactment is LARPing for people with no imagination.
|
|
Post 4 made on Thursday April 30, 2015 at 12:56 |
Zohan Super Member |
Joined: Posts: | September 2010 3,096 |
|
|
On April 30, 2015 at 12:45, Fins said...
I don't understand why people use anything besides Ethereal. Because if your doing IR instead of a control system the emitter and receiver are fugly. The issue is that the ir emitter is about 5 times bigger than it should be so if you're doing more than 1 cable box in a rack and need to place covers on the emitters you can't. Im sure they work well otherwise.
Last edited by Zohan on April 30, 2015 16:32.
|
|
Post 5 made on Thursday April 30, 2015 at 14:07 |
cshepard Advanced Member |
Joined: Posts: | June 2008 767 |
|
|
Binary HDBT has worked very well for us.
|
Chris |
|
Post 6 made on Thursday April 30, 2015 at 16:45 |
joelusi Long Time Member |
Joined: Posts: | October 2011 370 |
|
|
Binary HDbaseT works great for us. no issues. It just plain works
|
|
Post 7 made on Thursday April 30, 2015 at 17:09 |
Fins Elite Member |
Joined: Posts: | June 2007 11,627 |
|
|
On April 30, 2015 at 12:56, Zohan said...
Because if your doing IR instead of a control system the emitter and receiver are fugly. The issue is that the ir emitter is about 5 times bigger than it should be so if you're doing more than 1 cable box in a rack and need to place covers on the emitters you can't. Im sure they work well otherwise. First of all, who still does IR? Second, I dont care if it looks like a dog turd glued to the TV. You get Brent, and it works. Did I mention you get Brent?
|
Civil War reenactment is LARPing for people with no imagination.
|
|
Post 8 made on Thursday April 30, 2015 at 18:09 |
Trunk-Slammer -Supreme Loyal Member |
Joined: Posts: | November 2003 7,459 |
|
|
On April 30, 2015 at 17:09, Fins said...
First of all, who still does IR? Second, I dont care if it looks like a dog turd glued to the TV. You get Brent, and it works.
Did I mention you get Brent? But what can you do with Brent after you get him? Kick him in the nuts and steal his wallet? ;-)
|
|
Post 9 made on Thursday April 30, 2015 at 19:29 |
Duct Tape Loyal Member |
Joined: Posts: | November 2008 5,298 |
|
|
Snap hdbaset extenders have been rock solid for us. Have not had a single issue with them. I don't use the ir pass through though.
|
|
|
Post 10 made on Thursday April 30, 2015 at 19:40 |
ErikS Active Member |
Joined: Posts: | July 2003 699 |
|
|
The HDBT tx/rx extenders have been solid for us. We have put several HDBT matrices out in the field and the 8x8 units have had no issues. The one 16x16 unit we have done kept letting the connection to the rx unit go to "sleep" but after a firmware update, it has worked flawlessly since.
|
|
Post 11 made on Thursday April 30, 2015 at 20:15 |
Indigo Select Member |
Joined: Posts: | January 2008 2,040 |
|
|
Got burned twice with Snaps, never again.
|
|
Post 12 made on Thursday April 30, 2015 at 20:19 |
skynyrdfan Active Member |
Joined: Posts: | March 2006 666 |
|
|
Snaps HDBASE T are all I use. Very few issues..
|
|
Post 13 made on Thursday April 30, 2015 at 21:03 |
Zohan Super Member |
Joined: Posts: | September 2010 3,096 |
|
|
On April 30, 2015 at 17:09, Fins said...
First of all, who still does IR? Second, I dont care if it looks like a dog turd glued to the TV. You get Brent, and it works.
Did I mention you get Brent? So you have a man crush on Brent. Good for you for coming out.
|
|
Post 14 made on Thursday April 30, 2015 at 21:24 |
Fins Elite Member |
Joined: Posts: | June 2007 11,627 |
|
|
I've made my feelings about Brent no secret. He sets the bar for other companies tech support to strive for. And, consider what all ethereal did to solve the problem with the new HDMI chips before most manufacturers even knew they had problems. I'm all for supporting a company that supports us
|
Civil War reenactment is LARPing for people with no imagination.
|
|
Post 15 made on Thursday April 30, 2015 at 22:14 |
kwkshift Active Member |
Joined: Posts: | February 2004 508 |
|
|
I have had no issues with any of them that I deployed.
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|