| Post 31 made on Sunday May 29, 2016 at 23:51 |
An informed opinion is worth more than the sum of its parts. Thank you for sharing yours.
|
|
| Post 32 made on Sunday May 29, 2016 at 23:57 |
If you pull down to hard "fast" on a Qmotion roller shade it is possible to damage the planetary gears and or back feed the controller and damage it.
|
|
| Post 33 made on Monday May 30, 2016 at 00:16 |
The diameter of the shade tube has a lot to do with the length of the shade.
The minimum diameter is of cource limited by battery diameter. The motors have different gear ratios and voltages.
The larger the shade "distance spanned "
the bigger the tube diameter "required to prevent tube deflection "
the more springs required to counter balance
the greater the number of batteries and
the higher the gear ratio on the motors.
There are complex calculations involved and the tolerances of individual components vary slightly, making it impossible to perfectly match two shades without some form of active feedback loop connecting them.
These are essentially blind shades.
|
|
| Post 34 made on Monday May 30, 2016 at 04:47 |
Mario Loyal Member |
Joined:
Posts: | November 2006
5,681 |
|
|
Is this a monologue or have you not figured out how to use the Quote button yet?
|
|
|
| Post 35 made on Monday May 30, 2016 at 09:52 |
goldenzrule Loyal Member |
Joined:
Posts: | July 2007
8,474 |
|
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
