Your Universal Remote Control Center
RemoteCentral.com
Custom Installers' Lounge Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Zektor Palladia 6X4
This thread has 4 replies. Displaying all posts.
Post 1 made on Saturday June 7, 2014 at 12:12
longshot16
Super Member
Joined:
Posts:
November 2009
3,442
Does anyone know if there is lipsync delay and what the retail price point is for the unit?

PM me if you have details.
Does the unit also have HD Base-T receivers?
The Unicorn Whisperer
Post 2 made on Wednesday June 18, 2014 at 01:09
Jeff at Zektor
Active Member
Joined:
Posts:
August 2009
596
Sorry I missed this. Slammed and getting ready for Infocomm, I haven't been on the forum much.

Yes, the Palladia III 6X4 has lip sync as a standard feature. Also, the HDBT and HDMI outputs are mirrored supporting 8 displays. It has a full 8X8 DSP audio matrix integrated with all the same features as the ProAudio series.

Initially, we are going to produce the lite version since that is what has mostly been requested.

I will send you an updated price sheet.

Jeff
Jeff Haynes
The CA Guy
Coastal Source [email protected] 619-889-3700
OP | Post 3 made on Wednesday June 18, 2014 at 09:43
longshot16
Super Member
Joined:
Posts:
November 2009
3,442
Thanks Jeff
The Unicorn Whisperer
Post 4 made on Sunday August 17, 2014 at 18:33
HiroPro
Lurking Member
Joined:
Posts:
August 2014
1
Hey Jeff,

Could you possible forward a price sheet on the Palladia III 6X4 lite. I'm also curious if a manual is available on your website etc.

I'm curious about the DSP features and am curious if it compares to a DBX ZonePro or Rane HAL system.

It's a bar with three discrete TVs IE BDU STB tuners for each and 6 audio zones (each TV is a stereo zone the rest can be 70v mono).

I'm hoping for full AV crosspoint matrix HDMI digital AV mux and DSP features like filters and echo delay.

I would also like to have a stage XLR input for performers to jack in and be routable.

Is it possible to sum stereo to mono in the DSP engine?

Do you guys support iRule control?

Does it have an HTTP interface?

Basically I'm looking for a Cloud DCM-1e or Rane HAL or DBX Zonepro or Bosch PLENA with HDMI crosspoint DAC ADC and full DSP suite with HTTP/IP control etc. Hopping to provide control via iOS/Android using iRule or RoomieRemote.

Crestron has a product that can do this but the pricing is insane. HydraConnect has a unit but again the pricing is absurd IMHO.

I require no paging, grouping or priorities for a bar install.

Last edited by HiroPro on August 18, 2014 14:31.
Post 5 made on Sunday August 17, 2014 at 22:20
Jeff at Zektor
Active Member
Joined:
Posts:
August 2009
596
Thanks for the opportunity. The 6X4's are just beginning production release. We'll have them running a rack at CEDIA if you are going and want to come by the booth and check them out.

Send me an email jhaynes at zektor.com

Jeff
Jeff Haynes
The CA Guy
Coastal Source [email protected] 619-889-3700


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse