|
|
|
Custom Installers' Lounge Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
Topic: | help please? This thread has 14 replies. Displaying all posts. |
|
Post 1 made on Sunday September 5, 2004 at 18:01 |
skiptroll Long Time Member |
Joined: Posts: | August 2004 19 |
|
|
i put a post in the pronto 7000 user forum but i can't figure it out. i have a fujitsu plasma vision tv. it is in a cabinet that goes up and down with the power button from oem remote. i programed a pronto neo 500 and works fine. my 7000 will not rasie tv. it turns it on, off and lowers fine but it will not raise it. if someone know anything would be great.
thanks
|
|
Post 2 made on Sunday September 5, 2004 at 18:41 |
flcusat Senior Member |
Joined: Posts: | April 2003 1,326 |
|
|
It looks like you are missing the raise command in the Power up macro.
This message was edited by flcusat on 09/05/04 19:23 ET.
|
I'm always right. The only time I was wrong was the time that I thought, that I was wrong.
|
|
OP | Post 3 made on Sunday September 5, 2004 at 18:53 |
skiptroll Long Time Member |
Joined: Posts: | August 2004 19 |
|
|
actually the same button raise's it and turns it on and turns it off and lowers it. same ir code. on the oem remote when tv is down i press power button and tv comes up. then i press power and it turns on. once on if i press power it turns off and goes down. i learned the ir code from oem remote to pronto 500 and it works fine. so made macro to use power, that raise tv then turn on ird, rec and then 20 second delay and power again which turns on tv. for some reason the 7000 will not rasie tv. it turns it on and turns it off and lowers. but with tv down it will not raise it. i can't figure it out.
thanks
|
|
Post 4 made on Sunday September 5, 2004 at 19:26 |
flcusat Senior Member |
Joined: Posts: | April 2003 1,326 |
|
|
Let's start from the scratch. The OEM remote for the lifter has a toggle up/ down command or has discretes up and down codes? Also Do you have discrete Power On and Off for the TV set or just Power toggle?
|
I'm always right. The only time I was wrong was the time that I thought, that I was wrong.
|
|
OP | Post 5 made on Monday September 6, 2004 at 00:32 |
skiptroll Long Time Member |
Joined: Posts: | August 2004 19 |
|
|
sorry was out for dinner. the lifter actually works from the oem remote for the fujitsu tv. when i press power on the oem fujitsu remote the tv comes up. then i press power again same remote same button and the tv turns on. when on i press the same button and the tv goes off and down. i programed my pronto neo and it worked fine no problems. went to upgrade to tsu 7000. did same thing but the tv will not raise. when it is up the 7000 will turn it on. when on the 7000 will tunr it off and lower it.
thanks
|
|
Post 6 made on Monday September 6, 2004 at 02:15 |
AVXpressions Senior Member |
Joined: Posts: | September 2002 1,163 |
|
|
I suppose you have tried relearning the power command from the fujitsu plasm???
If you raise the lift and then execte your pronto macro will it turn the dislay on?? If not your code is bad. If your macro is a set of learned codes and not links then your first power command you learned is probably bad.
Last but not least. Make sure it is not transmitting in RF if you need IR output or just the opposite.
I assume that this is the way your lift system works:
You learn the display devices Power command into the little black control box. That way when you press the power button the first time the lift activates. Then you press your power button again once the lift is raised to turn your display on. When you press the power button again to turn the display off the lift lowers automatically. It does this because the outlet the display is plugged into is current sensing. When it detects the current drop it tells the lift to lower so you don't have to press a button to get the lift to go down.
With that said here's what I would try (and what we do).
Program a different button command into your lift. Use something other than the power button (we usually will use a code from our library from something other than any of the components we are programming into the system.) Then program that button into your pronto remote.
|
|
OP | Post 7 made on Monday September 6, 2004 at 10:21 |
skiptroll Long Time Member |
Joined: Posts: | August 2004 19 |
|
|
okay that is exactly it. now my onlly problem is the installer is out of town for a week. i found i think what is the lifting device. it says lift tech. has a black and red button on it. how can i program it to a different ir code? thanks for the help guys i am almost there.
|
|
OP | Post 8 made on Monday September 6, 2004 at 10:39 |
skiptroll Long Time Member |
Joined: Posts: | August 2004 19 |
|
|
i have the instrustions for the lift tech but it does not tell me how to change the ir codes. it says when first installing tv plug into outlet marked sensor and within 5 seconds press button you want to use. i unplugged tv and plugged back into senosr but it will not change the code. thanks
|
|
OP | Post 9 made on Monday September 6, 2004 at 10:48 |
skiptroll Long Time Member |
Joined: Posts: | August 2004 19 |
|
|
okay i think i am going to trhow this freekin pronto out. this sucks. i got it to learn a different button on the tv remote volume up. the pronto still will not lift the tv. so i tried to learn a button on the pronto. it will not learn to lift it up. what else can i do? this sucks so bad
|
|
Post 10 made on Monday September 6, 2004 at 12:14 |
AVXpressions Senior Member |
Joined: Posts: | September 2002 1,163 |
|
|
Learn the button you want to use into the pronto first. Then use the pronto to teach the IR code to the lift-tech box. This way you are sure the code will be exactly the same for both the pronto and the lift-tech.
Robbie
|
|
OP | Post 11 made on Monday September 6, 2004 at 15:09 |
skiptroll Long Time Member |
Joined: Posts: | August 2004 19 |
|
|
thats what i tried. i learned a button in protnot and tried to teach the lift tech box that button. it won't learn from the 7000. it has no problem from the 500 or other remotes but it will not take it form 7000. this is very wierd
|
|
Post 12 made on Monday September 6, 2004 at 18:03 |
AVXpressions Senior Member |
Joined: Posts: | September 2002 1,163 |
|
|
Are you sure the pronto is transmitting the code in IR and not in RF?????
Robbie S
|
|
OP | Post 13 made on Monday September 6, 2004 at 22:57 |
skiptroll Long Time Member |
Joined: Posts: | August 2004 19 |
|
|
yeah it is in ir mode. don't know what else to try.
|
|
Post 14 made on Wednesday September 8, 2004 at 00:33 |
Sounds like you need to delve further into the operation of the macro. If the OEM remote still works and the operation executes in both the up and down modes, then you must have something improperly configured in the TSU7000.
|
|
Post 15 made on Wednesday September 8, 2004 at 00:39 |
try loading the pronto neo file into the 7000 . Make sutre you reset the 7000 to factory default first. Get rid of all of your programming. If it works in the NEO, it should work in the 7000
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|