Post 1 made on Wednesday August 18, 2004 at 10:31 |
pal Long Time Member |
Joined: Posts: | January 2004 39 |
|
|
I have a pronto tsu3000. I have two newer rca directv receivers. There is an option on the rca remote to change the ir code of the receiver so that one receiver is controlled by one set of codes, and the other is controlled by another set. This would be helpful so that when I change the channel on one receiver, it doesn't change it on the other one also. Is there a way to program the pronto to recognize this?
|
|
Post 2 made on Wednesday August 18, 2004 at 13:36 |
jmk8793 Long Time Member |
Joined: Posts: | March 2004 84 |
|
|
Change the Rca remote codes first. Then use both Rca remotes on each box to verify change. Then learn codes to Pronto on seperate device pages, ie sat 1 and sat 2. Good luck
|
KntRdr |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.