Post 1 made on Tuesday October 15, 2013 at 08:26 |
lippavisual Senior Member |
Joined: Posts: | December 2007 1,458 |
|
|
I'm creating a 1way rs232 driver for an Extron Presentation switcher IN1606 and I have everything working except the volume commands (up, down, mute on, mute off).
This is being used in a C4 system. I've tried several ways of doing it, even through an emulator, and can't figure it out. Could someone point me in the right direction please?
I tried copy and paste but doesn't show up correctly so here's my version, if you could follow.
Here's the syntax for volume up: [Esc]D[X43]*[X48]+GRPM carriage return no linefeed (straight arrow pointing to the left)
[X43]= Volume Group number, which is 8 [X48]= Increment Value, which is 100
I've tried= 1BD8*100+GRPM\r with no luck
Also tried converting all of it to hex with no luck.
Many thanks to the ones that help!!
|
|
|
OP | Post 2 made on Tuesday October 15, 2013 at 13:54 |
lippavisual Senior Member |
Joined: Posts: | December 2007 1,458 |
|
|
Wow, no love ehh?
back to the emulator then to try and figure this out.
|
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.