Make sure auto-input mode on the set is disabled, and your baud rate in SMW is 4800.
Your strings are correct, just don't forget the \x before the hex bytes.
The following protocol document is for the PDP-502MX, but the strings appear to be the same. According to this, the 3-second delay is normal (6 seconds between ON & OFF):
[Link: pioneerelectronics.com]Also, Crestron has a module available that should work:
[Link: crestron.com]Doug @ HomeWorks
This message was edited by deb1919 on 07/02/04 06:44.