Post 1 made on Thursday June 24, 2004 at 10:45 |
OJNORWAY Lurking Member |
Joined: Posts: | October 2003 7 |
|
|
Our new ProntproNG will not learn codes to the Force 516 satelite receiver. When contacting the manufacturer for getting the hex-files,(wich they would.nt give us)they told us they where using a new protocol called XMP wich most of the learning remotes couldnt learn the algorithme yet.
Anyone got a clue?
|
|
Post 2 made on Thursday June 24, 2004 at 17:17 |
jarmstrong Founding Member |
Joined: Posts: | March 2002 1,780 |
|
|
Try these. They are numerals 0 through 9 and last is Power toggle.
Please let me know if they work or not.
0000 6D 0000 0012 0007 001C 0007 005D 0007 001C 0007 006A 0007 0031 0007 0031 0007 001C 0007 005D 0007 020C 0007 001C 0007 001C 0007 001C 0007 001C 0007 001C 0007 001C 0007 001C 0007 001C 0007 0BEE
0000 6D 0000 0012 0007 001C 0007 005D 0007 001C 0007 006A 0007 0031 0007 0031 0007 001C 0007 005D 0007 020C 0007 001C 0007 0041 0007 0046 0007 001C 0007 001C 0007 001C 0007 001C 0007 0022 0007 0BEE
0000 6D 0000 0012 0007 001C 0007 005D 0007 001C 0007 006A 0007 0031 0007 0031 0007 001C 0007 005D 0007 020C 0007 001C 0007 003B 0007 0046 0007 001C 0007 001C 0007 001C 0007 001C 0007 0027 0007 0BEE
0000 6D 0000 0012 0007 001C 0007 005D 0007 001C 0007 006A 0007 0031 0007 0031 0007 001C 0007 005D 0007 020C 0007 001C 0007 005D 0007 001C 0007 001C 0007 001C 0007 001C 0007 001C 0007 002C 0007 0BEE
0000 6D 0000 0012 0007 001C 0007 005D 0007 001C 0007 006A 0007 0031 0007 0031 0007 001C 0007 005D 0007 020C 0007 001C 0007 0031 0007 0046 0007 001C 0007 001C 0007 001C 0007 001C 0007 0031 0007 0BEF
0000 6D 0000 0012 0007 001C 0007 005D 0007 001C 0007 006A 0007 0031 0007 0031 0007 001C 0007 005D 0007 020C 0007 001C 0007 002C 0007 0046 0007 001C 0007 001C 0007 001C 0007 001C 0007 0036 0007 0BEE
0000 6D 0000 0012 0007 001C 0007 005D 0007 001C 0007 006A 0007 0031 0007 0031 0007 001C 0007 005D 0007 020C 0007 001C 0007 0027 0007 0046 0007 001C 0007 001C 0007 001C 0007 001C 0007 003B 0007 0BEE
0000 6D 0000 0012 0007 001C 0007 005D 0007 001C 0007 006A 0007 0031 0007 0031 0007 001C 0007 005D 0007 020C 0007 001C 0007 0022 0007 0046 0007 001C 0007 001C 0007 001C 0007 001C 0007 0041 0007 0BEE
0000 6D 0000 0012 0007 001C 0007 005D 0007 001C 0007 006A 0007 0031 0007 0031 0007 001C 0007 005D 0007 020C 0007 001C 0007 001C 0007 0046 0007 001C 0007 001C 0007 001C 0007 001C 0007 0046 0007 0BEE
0000 6D 0000 0012 0007 001C 0007 005D 0007 001C 0007 006A 0007 0031 0007 0031 0007 001C 0007 005D 0007 020C 0007 001C 0007 006A 0007 0046 0007 001C 0007 001C 0007 001C 0007 001C 0007 004B 0007 0BEE
0000 6D 0000 0012 0007 001C 0007 005D 0007 001C 0007 006A 0007 0031 0007 0031 0007 001C 0007 005D 0007 020C 0007 001C 0007 004B 0007 0046 0007 001C 0007 001C 0007 001C 0007 001C 0007 006A 0007 0BEF
|
|
OP | Post 3 made on Friday June 25, 2004 at 02:51 |
OJNORWAY Lurking Member |
Joined: Posts: | October 2003 7 |
|
|
Thanks I'll try it later today. For sure I'm gonna give you a notice if they work or not.
If they do, have you got any more of the codes or what's the resource for it?
Thanks again
|
|
Post 4 made on Saturday June 26, 2004 at 10:55 |
jarmstrong Founding Member |
Joined: Posts: | March 2002 1,780 |
|
|
I can probably come up with all the basic commands if that is the correct IR protocol.
|
|
Post 5 made on Monday June 28, 2004 at 07:47 |
jarmstrong Founding Member |
Joined: Posts: | March 2002 1,780 |
|
|
I looked at this a little more and I think it has both a make(when the button is pressed) and break (button released) command, like a keyboard.
Just learn these with a sharp tap of the key rather than holding it down.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.