Post 1 made on Monday June 21, 2004 at 18:46 |
BigDaddyMJ Long Time Member |
Joined: Posts: | November 2003 54 |
|
|
Hey guys and gals,
I have a customer that wants to get lighting controls in his house and use his TSU3000 w/RF adaptor to control approx. 15 switches. We looked at the RadioRA system but it has it's own propriatary codes. Any suggestions would be greatly appreciated.
|
|
Post 2 made on Monday June 21, 2004 at 19:48 |
jputtcamp Long Time Member |
Joined: Posts: | June 2002 283 |
|
|
IR to RA module (from Lutron) and RFX6000 will give you a round about RF control of the RA system.
|
|
Post 3 made on Monday June 21, 2004 at 21:07 |
Rudi T Angeli Lurking Member |
|
|
Would your client walk from room to room with the remote? If that was the cast you could use Grafik Eye or spacer from Lutron. If he or she wants to control lights from the home theater location maybe X10 is your best choice.
|
|
Post 4 made on Tuesday June 22, 2004 at 08:27 |
Bruce Sinclair Active Member |
Joined: Posts: | April 2003 694 |
|
|
One thing to keep in mind when using a Radio Ra IR interface is you are limited to fifteen toggle commands plus ALL ON and All OFF. If they are already wanting to control fifteen switches they are pretty much maxed out.
|
Bruce Sinclair CMB Integrations LLC DMC-E "Those who are most critical, often have no real skills themsevles" |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.