Post 1 made on Friday June 18, 2004 at 11:16 |
I have a AMX PLB-AS8 8X8 Audio Matrix Switcher that has 8 inputs and 8 outputs.
I planned on using 4 of the inputs for stereo sources, but I wanted to use the remaining 4 inputs for 8 mono sources.
Does anyone with Experience in this switcher know if I can use the remaining 4 stereo inputs on the AMX AS8 and convert each one of them to 2 mono inputs each instead of the 1 stereo input?
Thanks.
PS: Are there any AMX programmers on this forum? caravellaj at yahoo
|
|
Post 2 made on Friday June 18, 2004 at 11:42 |
Impaqt RC Moderator |
Joined: Posts: | October 2002 6,233 |
|
|
Yes, there is at least one AMX Programmer in this forum.......
Left Inputs = 17-32 Right Inputs = 33-48
So with an AS-8 to switch Mono Input 5 Left to Stereo output 1 you would use
Send_Command dvAs8,"'AI21O1'" (Input 21 to Output 1)
Yahoo groups has a couple of AMX Forums... AMXHelp and crestronamxprogrammersclub
Neither gets a lot of traffic, but there are a few of us there on a regular basis.
|
|
|
OP | Post 3 made on Friday June 18, 2004 at 12:06 |
Great information. Thanks. I heard that it was possible but many have told me not with this switcher.
Do you program small resi AMX/netlinx system in NJ?
Thanks,
|
|
Post 4 made on Friday June 18, 2004 at 18:23 |
Impaqt RC Moderator |
Joined: Posts: | October 2002 6,233 |
|
|
I primarily do large scale residential jobs......
but.....
Happily and Gainfully employeed in Chicago....
Post the request in one of those Yahoo groups I mentioned... There are a few freelance guys that hang out there.
|
|
|
OP | Post 5 made on Friday June 18, 2004 at 18:48 |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.