Post 1 made on Friday May 7, 2004 at 02:08 |
Tom Ciaramitaro Loyal Member |
Joined: Posts: | May 2002 7,968 |
|
|
URC-2P drag n drop has a couple buttons that I havent figured out. In the command window you can select Tier 1 and Tier 2, but what are the Shift Cursor 1 and 2 (or whatever they say) down there?
|
There is no truth anymore. Only assertions. The internet world has no interest in truth, only vindication for preconceived assumptions. |
|
Post 2 made on Friday May 7, 2004 at 03:40 |
Stew Pidasso Long Time Member |
Joined: Posts: | September 2003 322 |
|
|
As you probably know, any button on the remote can be programmed for two different functions. Tier 1 refers to the first command and tier 2 refers to the second. Pushing the button normally sends out the tier 1 command, whereas holding the button down for one second or more sends out the tier 2 command.
With the shift curser featue, you can assign a button to change the entire "curser" group of buttons to tier 2 commands or sequences. You can program a second button to return the cuser buttons back to their tier 1 functions. This is ideal when you want to use the buttons for transport fuctions as well as cursers. As an example, the "channel up" button can be programmed to change the cusers to Tier 2 commands, with the "Channel down" button programmed to shift the cursers back to Tier 1 commands. Buttons in the curser group of buttons cannot be used as the shifts.
This feature can only be taught to the remote using the DD4 and not with direct remote to remote programming.
I hope I have helped.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.