| Post 1 made on Saturday March 27, 2004 at 00:28 |
Hello everyone. This will be my first post here after several months of lurking, so I hope you guys can help. I just inherited an AMX (Panja) touchpanel and an AMX Axcent-3 controller. I have a Sunfire Theater Grand Pre-pro series 1. The manual, as well as the tech guys at Sunfire sent me the RS-232 binary codes for the Sunfire, but they are a very short list of basic commands - not even radio tuning. The series 2 and above have many more codes available. My question is this : does anyone know ALL the available codes for a series 1 theater grand? And what are they? Also needed are the commands for a SONY SAT-A65 DTV box. I can always go IR but I've lost all programming from the Sunfire remote with no way to get it back, and I can't find a universal remote with Sunfire codes. So any help would be GREATLY appreciated.
|
|
| Post 2 made on Saturday March 27, 2004 at 10:40 |
Impaqt RC Moderator |
Joined:
Posts: | October 2002
6,233 |
|
|
You have the comple list of TheaterGrand codes. The RS-232 was improved significantly in the Series 2. I havent check myself, but I'd be surprised if the IR codeset wasnt already inthe AMX database. Worst case senarion you can grab a Pronto CCF with the codes you need. and import it into IREdit.
As for the DSS..... IR IS the way to go and those codes are definatly in the AMX Database.
|
|
|
| Post 3 made on Saturday March 27, 2004 at 12:35 |
DavidatAVX Founding Member |
Joined:
Posts: | August 2001
440 |
|
|
The Sony A65 uses the 'new command set' from the link below. [Link: pcmx.net]Dave
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
