Post 1 made on Sunday March 14, 2004 at 21:16 |
CyderSolutions Lurking Member |
Joined: Posts: | February 2004 4 |
|
|
I am trying to figure out with I did wrong when programming a Home Theater Master MX-500 remote to control the Elan System 6 volume and sources. I programmed with a the Via!Tools that is all up to date and tested it with my computer before programming. The MX-500 wouldn't take the programming at all. Does anyone have any ideas?
|
|
Post 2 made on Sunday March 14, 2004 at 21:34 |
installer_574 Long Time Member |
Joined: Posts: | November 2003 220 |
|
|
Post that question here: [Link: haguirre.com]
|
Go phuq yourself! |
|
Post 3 made on Sunday March 14, 2004 at 22:48 |
jwalkup Founding Member |
Joined: Posts: | December 2001 320 |
|
|
Did you try the pre-programed codes of the MX-500? If not try "audio 057" or "audio 290" and check your punch through.
|
|
Post 4 made on Monday March 15, 2004 at 09:06 |
jputtcamp Long Time Member |
Joined: Posts: | June 2002 283 |
|
|
Are you trying to program the 500 using ViaTools?
|
|
Post 5 made on Monday March 15, 2004 at 13:57 |
GotGame Super Member |
Joined: Posts: | February 2002 4,022 |
|
|
Please include a brief description of what you wanted the MX500 to do and in how many zones.
|
I may be schizophrenic, but at least I have each other. |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.