Okay,
I need some suggestions from any of you M&K users out there.

I have just installed 3 S150P (Active) speakers for the front 3 channels of an AV system.

The problem is the speakers are mounted low and need to be angled upwards to aim them at the listener.

The bracket M&K supplied only seems to angle downwards and even when it is set level the speaker bracket slowly starts to bend forward due to the weight of the speaker, after checking with M&K this appears to be the only option they have.

Any suggestions or best ways of overcoming this or do I require a whole new custom designed bracket?

We've done some pretty insane things with S150P's I have one client with 3 Stacks of 3across the front of his theater..... We Designed and had a custome bracket built for that application with Tilt and Pan built into each head of the tower. This design could probobly be modified to accomodat just one....

Email me and I'll look into what it would take to get a set constructed...

Thanks Impaqt,

We're currently looking at all the available options with the speaker positions.

I'll let you know if I need your help.

dismantle the M&K bracket and re-assemble with the adjusting screw / nut on the inside of the bracket to push it out instead.

Sorry incognito_878,

I'm not sure how you are achieving this, have you tried it?

The brackets are at the clients house but I can remember them fairly well.

Thanks.