Your Universal Remote Control Center
RemoteCentral.com
Custom Installers' Lounge Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
2 dishes with DTC-100
This thread has 2 replies. Displaying all posts.
Post 1 made on Wednesday April 3, 2002 at 10:17
joeld
Founding Member
Joined:
Posts:
March 2002
5
I am trying to use two round dual lnb dishes to tune to the 101 and 119 sats. I am useing the multiswitch that comes with the oval dishes. I already have 101 tuned perfectly. The problem is the DTC-100 wont give me coordinates for the 119 sat with a round dish. My area code is 53151, any help would be appreciated.
Post 2 made on Wednesday April 3, 2002 at 14:12
Dave Blaker
Founding Member
Joined:
Posts:
September 2001
613
It's the same coordinates as the Dish Network round dish. Dish's main signal, which is 119, is the same direction as DTV's 119 Hi-Def signal.

Dave
Post 3 made on Friday April 5, 2002 at 00:32
ECHOSLOB
Founding Member
Joined:
Posts:
February 2002
391
Azimuth=222
Elevation=32

I had to delete my first response as I was going to tell you to select dual dish in your setup to get the correct info but then I realized it is just for the batwing (oval) and not for single round dishes. I fired up my 4900 (Dishnet) and put your zip in for the 119 bird and this what I got for you :)


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse