|
|
|
Custom Installers' Lounge Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
LG 3200A SAT receiver issues
| |
|
Topic: | LG 3200A SAT receiver issues This thread has 7 replies. Displaying all posts. |
|
Post 1 made on Tuesday December 16, 2003 at 21:37 |
thorpaws Lurking Member |
Joined: Posts: | November 2003 5 |
|
|
I am having issues trying to install a LG 3200A SAT receiver. It is connected to a TERK TRK-S26 triple LNB dish. Presently, I am able to receive a signal on SAT A, but I am unable to get a signal on either SAT B or C. I have tried rotating the dish as well as connecting the cable to all of the four outputs on the LNB(which contains the built-in multi-switch). In addition, I have tried the various different transponders assigned to SAT A, B, and C. Does anybody know if this is an issue with the SAT receiver, the dish, or the LNB? All input would be appreciated.
|
|
Post 2 made on Tuesday December 16, 2003 at 21:56 |
Impaqt RC Moderator |
Joined: Posts: | October 2002 6,233 |
|
|
No Offense.... But My first guess would be a Problem with the Installer. Since All three LNB's work independantly of each other for the most part The fact that your getting one (A... The easiset to tune in) and not the other TWO leads me to believe this is an installation issue. I have had lots of instances where ONE LNB went bad, but never two... Out of the box even.... Have you checked the Level of the dish? Have you double checked ther Tilt, Azimuth, and Angle adjustments for your specific area?
|
|
|
OP | Post 3 made on Tuesday December 16, 2003 at 22:24 |
thorpaws Lurking Member |
Joined: Posts: | November 2003 5 |
|
|
I (we) have verified tilt, azmuith, and angle several times. Futhermore, I have installed many satellite systems that include this dish and LNB, but never had any problems. This is the first time that I have used this particular SAT receiver. Does anybody have any other ideas as to why I may be having this problem?
|
|
Post 4 made on Tuesday December 16, 2003 at 22:31 |
Impaqt RC Moderator |
Joined: Posts: | October 2002 6,233 |
|
|
I've Installed over a Dozen LSS-3200A so far and have not experienced this problem. We use the Terk Dishes as well.
|
|
|
Post 5 made on Tuesday December 16, 2003 at 22:41 |
DavidatAVX Founding Member |
Joined: Posts: | August 2001 440 |
|
|
How long is the coax run from receiver to dish? What kind of wire RG6, RG59 ?
Dave
|
|
Post 6 made on Wednesday December 17, 2003 at 00:21 |
RTI Installer Super Member |
Joined: Posts: | March 2002 3,320 |
|
|
Dishes are cheep, get another one and swap out the triple LNB, if that works fine, if not, swap out the LG box.
|
Never Ignore the Obvious -- H. David Gray |
|
Post 7 made on Wednesday December 17, 2003 at 22:37 |
McNasty Founding Member |
Joined: Posts: | January 2002 1,322 |
|
|
Hows the horizon look? Tall trees or buildings will block out the B & C Sat while allowing you to see A. I've seen it before. Not often, but I've seen it.
|
|
Post 8 made on Thursday December 18, 2003 at 22:02 |
I had the same problem with one Terk dish and the switch was installed backwards from the factory. Just took it apart and put it back like it should have been.
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|