| Post 1 made on Monday December 8, 2003 at 21:37 |
NICKY6 Lurking Member |
Joined:
Posts: | December 2003
7 |
|
|
OK here goes i am experienced in some areas
control i am a novice
i just bought a niles intellicontroll2 remote
and programmer and sw to go with it
is anyone willing to help me out to get started setting it up
i will gladly take care of u for time spent with me
and if anyone here needs help with projectors or dss that is my area of knowledge
thanks
nicky6
|
|
| Post 2 made on Monday December 8, 2003 at 22:52 |
geraldb Long Time Member |
Joined:
Posts: | June 2002
412 |
|
|
Where did you buy this from if I may ask?
|
|
| Post 3 made on Tuesday December 9, 2003 at 10:43 |
Do you have the Intellicontrol Reference Manual? The latest version is V 8.0, and is available to dealers on the Niles website. A quick read of the manual should help. Second, the most inportant tool in programming an IntelliControl system, in addition to w well planned approach, is a Pronto. You cannot import remote control codes to Intellifile format, you'll need to learn them. Having a Pronto to learn them from is priceless. Third, choose a good antenna location (and if you are using an ealier generation MSU) you'll need some 3db and 6db inline Rf attenuators and a IntelliControl IR/RF Tester (#FG0727). The tester plugs into the MSU, and flashes green when a signal is recieved OK, red when it is not. I sure wish someone would build an updated version of this system, with a little more open programming platform and support for PVR devices. Clients love the product, and it was a pleasure to install.
jcmitch
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
