Post 1 made on Wednesday December 3, 2003 at 18:05 |
boostedh22a Lurking Member |
Joined: Posts: | November 2003 3 |
|
|
Has anyone ever used the Niles A4.6 system with an Escient Fireball successfully? I have done several of the A4.6 systems, and are very familiar with them. The Fireball is in another room, with the i/r flasher running over cat5. There is also an Intellicontrol at the location of the Fireball, it is synced with the A4.6 since the Fireball is shared for both systems. The i/r goes from the Intellicontrol, to the 4.6 then back to the Fireball and works everytime. But the keypads in the house just don't work consistently, except if I control it from my pc connected to the A4.6. Thanks for any advice.
|
|
Post 2 made on Wednesday December 3, 2003 at 18:59 |
Impaqt RC Moderator |
Joined: Posts: | October 2002 6,233 |
|
|
Niles has a Fireball driver on their website because the IR learner built into the 4.6 cant handle the IRda Protocal correctly. It also needs to Firmware revision 1.14 or greater.
Give niles Tech a call...
|
|
|
Post 3 made on Thursday December 4, 2003 at 00:00 |
avintegrator Long Time Member |
Joined: Posts: | March 2003 348 |
|
|
I concur with Impaqt on calling niles tech support, they are very helpful and helped to get pretty much the same system working for me when i was 4 states away from home
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.