Post 1 made on Tuesday December 2, 2003 at 10:53 |
Impaqt RC Moderator |
Joined: Posts: | October 2002 6,233 |
|
|
I have a Client that lives in Canada and has a Bell 6000 Satellite system. I found a CCF in the files section to grab the codes from, but its lables a little odd.... What appears to be a navigation array is lables as a PVR/VCR/DVD Transport.... IS this box also a PVR or are the lables just strange? If someone could send me a picture of the remote, that would be very handy.
TIA Impaqt
The buttons almost appear to be a Dish Netowrk Layout... Is this indeed Dish Network?
|
|
|
Post 2 made on Tuesday December 2, 2003 at 12:04 |
johnneeukca Long Time Member |
|
|
Impaqt, The 6000 series is the HD receiver, but it doesn't have the PR yet. The 5000 series however, does have a PVR. Further info, try: [Link: bell.ca]) J
|
|
OP | Post 3 made on Tuesday December 2, 2003 at 12:33 |
Impaqt RC Moderator |
Joined: Posts: | October 2002 6,233 |
|
|
OK, That helps a but..... Anyone know if it is indeed the same codeset as the Dish Network 6000?
|
|
|
Post 4 made on Tuesday December 2, 2003 at 12:45 |
FRR Advanced Member |
Joined: Posts: | June 2003 918 |
|
|
Impaqt, Bell ExpressVu uses the existing Dish Network system for satellite broadcasting.
Unfortunately, we don't have anything to compare with in Canada as the customers can only choose from Bell ExpressVu supplied receivers. I would suggest that you contact the Bell ExpressVu support number (shown on the web site) and ask them for the info. Let me know if you have any problems.
Cheers
|
Logic is a systematic method of coming to the wrong conclusion with confidence. |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.