Post 1 made on Saturday November 29, 2003 at 22:23 |
Dean Annigoni Founding Member |
Joined: Posts: | December 2001 80 |
|
|
Has anyone ever used a Channel Vision TE-20011 telephone entry/intercom module? If so do you know how to hook up two intercom door plates. When I hook up one, no problem but two, the phones continuely do their distictive rings.
Thanks, Dean
|
Seven P's of life- Prior Proper Planning Prevents Piss Poor Performance |
|
Post 2 made on Monday December 1, 2003 at 01:51 |
SkyBird Long Time Member |
Joined: Posts: | March 2003 349 |
|
|
How do you have the wiring ran from the doorbells to the channelvision? Do both doorbells work one at a time? If so, how do you have them wired together, are they both ran directly to the channel vision? If I recall this unit does not have 2 separate inputs for 2 separate doorbells, are they connected to the strike connections on the channel vision? Are you sure you have them both connected to the doorbell and not one to the striker?
|
|
OP | Post 3 made on Monday December 1, 2003 at 18:13 |
Dean Annigoni Founding Member |
Joined: Posts: | December 2001 80 |
|
|
Thanks for replying I finally got my answer from Channel Vision.
|
Seven P's of life- Prior Proper Planning Prevents Piss Poor Performance |
|
Post 4 made on Monday December 1, 2003 at 18:41 |
SkyBird Long Time Member |
Joined: Posts: | March 2003 349 |
|
|
What was your answer? Do you care to share with the class?
|
|
OP | Post 5 made on Monday December 1, 2003 at 22:15 |
Dean Annigoni Founding Member |
Joined: Posts: | December 2001 80 |
|
|
Sorry I didn't reply. Channel Vision stated my problem was that I have two lit doorbells. To overcome my problem I have to change the jumper on J21 on the board. This will solve the problem.
Dean
|
Seven P's of life- Prior Proper Planning Prevents Piss Poor Performance |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.