Your Universal Remote Control Center
RemoteCentral.com
Custom Installers' Lounge Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Bresnan, Comcast and others...filtering for internet only customers?
This thread has 4 replies. Displaying all posts.
Post 1 made on Friday October 24, 2003 at 23:36
avdude
Founding Member
Joined:
Posts:
February 2002
814
Hi all,

In the past I have noticed that my clients with ATT (Comcast now) and Bresnan Cable could sign up for internet access, and when the internet was brought in, they would then add a splitter and get a bunch of channels in addition to the internet...

Has any one heard if this is still possible, or if the cable co's have figured out a way to block signal OTHER than high speed altogether?

I've had two customers call and ask. I have told them to call the cable co's and PAY for the cable...but now as a tech, I'm curious if there is a way to filter these signals out when they are so similiar...it's intrigueing really!

avdude
site admin
www.integrationpros.com

This message was edited by avdude on 10/24/03 23:54.
AVDUDE
"It might work better if it were plugged in and programmed first...just a thought!"
Post 2 made on Saturday October 25, 2003 at 00:08
Daniel Tonks
Wrangler of Remotes
Joined:
Posts:
October 1998
28,781
As far as I've seen around here, they can block out most of the channels but not all (or at least it's too expensive to block them all out). I think a friend who doesn't get cable TV had maybe 8 channels at the bottom of the dial.
Post 3 made on Saturday October 25, 2003 at 22:58
cabledude
Long Time Member
Joined:
Posts:
October 2003
22
Yes the channels can and are blocked at least at Comcast cable in Portland, Or
Post 4 made on Monday October 27, 2003 at 23:13
phil
Founding Member
Joined:
Posts:
December 2001
2,164
I have a broadband connection without the cable portion. I get no channels at all. They must have a notch filter on the pole.
"Regarding surround sound, I know musicians too well to want them behind my back."
-Walter Becker
Post 5 made on Tuesday October 28, 2003 at 06:43
retrobrew
Lurking Member
Joined:
Posts:
October 2003
2
There is a passive bandpass filter inline at the drop. just like the negative filters that block hbo ,cine , etc. if you don't sub , this is a negative filter that blocks all ntsc ch's ( 2 - ** [like ch 68 , 78 etc] ). These filters block a freq. range like 48MHz to 600MHz and they let any signal below or above pass.

Comcast (ATT) in the dallas market is / has been putting these band pass filters on for about a year now , and only retrofitting accounts as they service them. so its very likely that you may not have one if your service has been uninterupped for over a year.

prior to a year ago , att was having problems w/ the return path levels w/ the BPF's inline , so they were not used unless T.O.S. was suspect.

Don't know about elsewhere , but when Comcast took over att in dallas , the new pricing was acually as cheap to have exp. basic cable and broadband service for about the same money as att was charging only for broadband service.

Buddy B
retrobrew


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse