| Post 1 made on Thursday October 23, 2003 at 16:57 |
QQQ Super Member |
Joined:
Posts: | January 2002
4,806 |
|
|
Yes, I will also be posting this in the remote forum but I would like some input from the people here. Has anyone here used two Home Theater Master MX-800's (both with RF stations) and experienced the remotes both controlling the two base stations EVEN when the base stations and remotes are set to different RF ID's In other words, one remote should ONLY control the master bedroom system and one should ONLY control the office system. But the master bedroom systems is controlling the office system even though it is set to a different RF ID than the office system (and we have tried multiple ID's).
The systems in each room are identical so it is causing a problem. Our next step will be to program the IR emitters so they aren't blasting all the compnents and making sure IR port A in one room goes to a different component than IR port A in the other room. But I would still like to know if anyone else has encountered this.
|
|
| Post 2 made on Thursday October 23, 2003 at 19:41 |
Impaqt RC Moderator |
Joined:
Posts: | October 2002
6,233 |
|
|
I have 3 in one home with very similar systems and have no interaction problems at all.
|
|
|
| OP | Post 3 made on Thursday October 23, 2003 at 21:41 |
QQQ Super Member |
Joined:
Posts: | January 2002
4,806 |
|
|
Interesting. Thanks. Anyone else?
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
