Your Universal Remote Control Center
RemoteCentral.com
Custom Installers' Lounge Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Dual voice coil in-wall subwoofer hookup question
This thread has 5 replies. Displaying all posts.
Post 1 made on Wednesday October 1, 2003 at 17:36
rdenatale
Long Time Member
Joined:
Posts:
June 2003
38
I just got a too good to pass up deal on an apparently unused Sonance PSWD-8 in-wall subwoofer, with no instructions.
This unit has a dual voice coil and a cross-over with L & R inputs and outputs.
For a home theater set-up, I'd think that it would be better to let the receiver do the subwoofer channel separation. Right?
So what's the best way to hook this thing up? Should I bypass the crossover or just ignore the outputs?
What's a reasonably priced amplifier to drive this? Would it be better to use a mono amp, and either parallel or serial connect the two voice coils, or use a stereo amp and split the sub-woofer pre-amp output from the receiver?
Post 2 made on Wednesday October 1, 2003 at 18:04
Impaqt
RC Moderator
Joined:
Posts:
October 2002
6,233
When things are too good to be true... They usually are..... Unless your in a 8x8 room, and you only listen to Mariah carey, you'r going to be pretty dissapointed in the output of that sub... Even with a beefy amp
Post 3 made on Wednesday October 1, 2003 at 23:25
Ernie Bornn-Gilman
Yes, That Ernie!
Joined:
Posts:
December 2001
30,104
I used one once with bad results. A Zamp overdrove it! The problem was made worse because it was between two pieces of drywall -- there was no solid box to limit the woofer motion.

When I say overdrove, I mean the voice coil smacked into the magnet structure, adding unintended square waves to the bass. And it wasn't vey loud.

If you can mount a box behind it, and get dimensions from Sonance, it might be okay, but still might not play too loud.
A good answer is easier with a clear question giving the make and model of everything.
"The biggest problem in communication is the illusion that it has taken place." -- G. “Bernie” Shaw
Post 4 made on Thursday October 2, 2003 at 00:53
geraldb
Long Time Member
Joined:
Posts:
June 2002
412
Don't waste your time for theater application. Most in-wall subs are meant to compliment and help round-out in-wall speakers.
For theater, buy a real sub!
OP | Post 5 made on Thursday October 2, 2003 at 10:16
rdenatale
Long Time Member
Joined:
Posts:
June 2003
38
Well, this is to add to an in-wall speaker setup in what's more of a media room than a theater.

Are there any decent in-wall subs? What about the Niles PSW-8?
Post 6 made on Friday October 3, 2003 at 22:52
QQQ
Super Member
Joined:
Posts:
January 2002
4,806
On 10/02/03 10:16, rdenatale said...
Well, this is to add to an in-wall speaker setup
in what's more of a media room than a theater.

Are there any decent in-wall subs? What about
the Niles PSW-8?

Very FEW. I would look at Triad. www.triadspeakers.com.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse