| Post 1 made on Saturday August 30, 2003 at 12:04 |
wamiott Founding Member |
Joined:
Posts: | August 2001
10 |
|
|
Wondering if anyone has power on and off codes for Classe SSP-30 or SSP-60 pre/pro. Any help would be appreciated!
|
|
| Post 2 made on Wednesday September 3, 2003 at 23:48 |
Don O'Brien Long Time Member |
Joined:
Posts: | August 2002
237 |
|
|
The SSP60 uses rc5 codes-
system 25
code 11 = On
code 10 = Off
On looks like this in a pronto
5000 0000 0000 0001 0019 000b
Off looks like this in a pronto
5000 0000 0000 0001 0019 000a
BTW,
since the second zone is not shut off with the discrete off for the main zone, I programmed the system off icon on my customers remote to send a "zone 2" command and then discrete off(same code as main zone) to assure that zone 2 was off. In addition, to turn on zone 2 send the "zone 2" command first and then subsequently send the discrete on (same code as main zone). Other codes available include discrete on/off for tape mon, discrete on/off for compression.
One other unsolicited contribution, the manufacturer has acknowledged that the ssp60 can be "locked-up" requiring a hard reset (5 min power disconnect) by the digital bitstream output from satellite receivers (unsure if it is the 48k PCM or the AC3). The symptom is complete loss of any output when powering the unit on (including all analog inputs). Engineering is working on the problem. Short term remedy-disconnect the digital connection to the processor and turn the digital setting in the menu to "none".
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
