Post 1 made on Tuesday August 12, 2003 at 11:52 |
I have 2 Sony DVD player(DVP7000 and DVP9000ES) in my family room, how can i operate the 7000 but not turn on the 9000 in the same time?????, the RC will turn on BOTH units, how to handle this????
Thanks for your advise
Tom
|
|
Post 2 made on Tuesday August 12, 2003 at 11:59 |
raiders_fan94 Long Time Member |
Joined: Posts: | September 2002 324 |
|
|
What kind of remote are you using?
If you're using a ProntoPro, you can set one up using RF and one using IR...Without that you may have to buy an IR router.
I'm sure there a lot more people more knowledgeable on the subject that will chime in.
|
Never underestimate the predictability of stupidity |
|
OP | Post 3 made on Tuesday August 12, 2003 at 12:19 |
I am using the Denon RC8000 (ATKIS) with the base (RF)
Tom
|
|
Post 4 made on Tuesday August 12, 2003 at 17:25 |
Ahl Founding Member |
Joined: Posts: | October 2001 1,241 |
|
|
If the Denon will let you control which emitter controls what, you can set one DVD player to be controlled by emitter 1, and the other to be controlled by emitter 2...
This is how the MX800 works
|
We can do it my way, or we can do it my way while I yell. The choice is yours. |
|
Post 5 made on Tuesday August 12, 2003 at 23:11 |
Impaqt RC Moderator |
Joined: Posts: | October 2002 6,233 |
|
|
Um... Remove the 7000 from the system.... If you have a 9000ES, there is no reason to still use the 7000.
Problem solved.
|
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.