|
|
|
Custom Installers' Lounge Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
Audio mute for mic system
| |
|
Topic: | Audio mute for mic system This thread has 6 replies. Displaying all posts. |
|
Post 1 made on Wednesday July 16, 2003 at 17:28 |
Question. We did an installation in a bar that is divided in two. I used the amp in Denon's DRA-395 stereo rec. to run one side of the bar. And a Speaker Craft Big Bang amp running line level out of the denon for the other. NOW here is the question. My customer want some type of microphone system like they used to use with there juke box were when you key the mic up it mutes the music. How do I do this?
|
|
Post 2 made on Wednesday July 16, 2003 at 22:10 |
glaro Founding Member |
Joined: Posts: | February 2002 101 |
|
|
you would need somesort of switch? i m sure that there is a switch out there that is audio sensing and will give priority to the mic-what happened to the old system?
|
|
Post 3 made on Wednesday July 16, 2003 at 22:19 |
GotGame Super Member |
Joined: Posts: | February 2002 4,022 |
|
|
Dump the dennon and get the bar a Bogen Pm3180.
|
I may be schizophrenic, but at least I have each other. |
|
Post 4 made on Thursday July 17, 2003 at 08:44 |
Fred Harding Super Member |
Joined: Posts: | October 2001 3,460 |
|
|
One alternative to explore is Shure's SCM262 mixer. This stereo mixer has three line level inputs and two mic inputs. Depending on how you choose to configure the system, you could insert this into the monitor loop, activate the loop, and be in decent shape. You'd want to activate ducking on the mic, and clearly, have a switched mic. Reasonably priced, too!
|
On the West Coast of Wisconsin |
|
Post 5 made on Thursday July 17, 2003 at 11:19 |
Ted Wetzel Founding Member |
Joined: Posts: | November 2001 879 |
|
|
I agree with the Dump the Denon campaign. When in a commercial situation - use commercial gear.
|
|
OP | Post 6 made on Thursday July 17, 2003 at 15:01 |
Thank's for all your help. I will look into Shure's product. And the DENON work well no matter were your at. Its good stuff.
|
|
Post 7 made on Thursday July 17, 2003 at 15:20 |
Ted Wetzel Founding Member |
Joined: Posts: | November 2001 879 |
|
|
The DENON is OK stuff. There are a lot of designers that refuse to spec DENON due to reliability problems. That is neither here nor there. My point was simply that Bogen or Shure products are designed for the problems that arise in a commercial setting such as needing a mic inputs, 70volt outputs and things that suit a commercial setting. It had nothing to do with Denon specificaly
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|