 |
 |
|
|
Custom Installers' Lounge Forum - View Post
|
|
 |
|
|
|
 |
|
The following page was printed from RemoteCentral.com:
|
Audio Access PX-600 & KPS Keypads
| |
|
| Topic: | Audio Access PX-600 & KPS Keypads This thread has 4 replies. Displaying all posts. |
|
| Post 1 made on Wednesday July 9, 2003 at 22:39 |
ThxdudeinTx Long Time Member |
Joined:
Posts: | March 2003
22 |
|
|
I am looking for the keypad dip switch setting instructions. One of my customers has just moved to the Dallas/Ft.Worth area from out of state and has an old Audio Access piece that does not appear to be passing its IR thru each of the keypads IR receiver. I am not an Audio Access dealer but installation is pretty straight forward considering the keypads only require a 4 wire hook-up. We are major Elan dealers, but the customer for right now would rather keep his Audio Access product which is fine, we just feel bad we can't get it working for him. We are using new emitters, etc. Any ideas? Do the keypads dip switches even effect the IR receiver (I appears they assign zone #, etc. similar to the Elan Z-100 keypads, etc. Thank You for anyone's help...
|
|
| Post 2 made on Thursday July 10, 2003 at 00:29 |
Brad Dunn Long Time Member |
Joined:
Posts: | March 2003
12 |
|
|
The kps keypad does not pass ir. It will only accept ir from the AA remote that mimics the keypad.
|
|
| Post 3 made on Thursday July 10, 2003 at 17:45 |
Tony Golden Founding Member |
Joined:
Posts: | August 2001
654 |
|
|
It's been a while since I've worked with one of those, but I'm fairly certain the keypad *can* pass IR. The feature can also be disabled by one of the dip switches.
If you can't find anyone with a manual, contact AudioAccess and they may send you one...
|
|
| OP | Post 4 made on Thursday July 10, 2003 at 23:18 |
ThxdudeinTx Long Time Member |
Joined:
Posts: | March 2003
22 |
|
|
thanks tony. i will try Audio Access tomorrow; i have heard that they may not help me because i am not a certified dealer. not much help from dealers in my area; may have to go outside my area
|
|
| Post 5 made on Friday July 11, 2003 at 20:28 |
cb1 Select Member |
Joined:
Posts: | September 2002
1,663 |
|
|
As Brad said, the only IR that is passed thru the system is either from the Audio Access remote, or from the IR signal learned into the 600 programer.(dealer only item) (Just pointing a cd remote at the keypad will not have any effect on the cd player. If you have changed components to different ones that what the customer oritgnally had, this could be you problem. The emmitters are port sensitive tuner to tuner, cd to cd, ect.
As far as the keypads go the IR dipswitch is for a keypad put out side or in direct light. Switch # 9
1=1
2=2
3=4
Add them together to get the right zone.
dip switch up
zone 1=1 up, zone 2 =2 up, zone 3= 1 and 2 up, zone 4= 3 up, zone 5= 3 and 1 up, zone 6= 3 and 2 up.
Email me I have what your looking for.
CB1
This message was edited by cb1 on 07/11/03 20:37.
|
why have a nice system if you cant operate it, program the remote the right way the FIRST time! |
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|
|
