Your Universal Remote Control Center
RemoteCentral.com
Custom Installers' Lounge Forum - View Post
Previous section Next section Previous page Next page Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Page 634 of 761
Topic:
What did you do today?
This thread has 11407 replies. Displaying posts 9496 through 9510.
Post 9,496 made on Wednesday April 1, 2015 at 21:37
roddymcg
Loyal Member
Joined:
Posts:
September 2003
6,796
On March 31, 2015 at 19:49, Fins said...
Any national anthem that doesn't end with "Gentleman Start Your Engines" is'nt shit.

That means be prepared to be bored out of ones mind watching left turns.
When good enough is not good enough.
Post 9,497 made on Wednesday April 1, 2015 at 21:58
Mac Burks (39)
Elite Member
Joined:
Posts:
May 2007
17,515
On March 30, 2015 at 13:27, mwstorch said...
Responded to "we just got new internet service" and now wi-fi doesn't work. Found new fiber into house with new router, rewired wi-fi, etc. Man that fiber stuff is fast....

 photo IMG_2062_zpsbazdfifb.jpg

Where is this at? I think i want to move.
Avid Stamp Collector - I really love 39 Cent Stamps
Post 9,498 made on Wednesday April 1, 2015 at 22:06
Fins
Elite Member
Joined:
Posts:
June 2007
11,627
On April 1, 2015 at 21:37, roddymcg said...
That means be prepared to be bored out of ones mind watching left turns.

Spoken like a naive individual that's never experienced a Bristol TN Saturday night race. You'll pay for the whole seat, but only use the edge of it.
Civil War reenactment is LARPing for people with no imagination.

Post 9,499 made on Wednesday April 1, 2015 at 22:24
roddymcg
Loyal Member
Joined:
Posts:
September 2003
6,796
On April 1, 2015 at 22:06, Fins said...
Spoken like a naive individual that's never experienced a Bristol TN Saturday night race. You'll pay for the whole seat, but only use the edge of it.

And a left turn, and a left turn, and another left turn. Oh and wait for it....... another left turn.
When good enough is not good enough.
Post 9,500 made on Wednesday April 1, 2015 at 22:41
Hi-FiGuy
Super Member
Joined:
Posts:
January 2004
2,836
On April 1, 2015 at 22:24, roddymcg said...
And a left turn, and a left turn, and another left turn. Oh and wait for it....... another left turn.

He meant F1 so both left and right turns.

And a turn is a turn is a turn and cars that are set up to turn one way are pretty interesting beasts.

Needles to say they are harder to keep going in a straight line than turning. you let go of the wheel on them and they turn left.

On the other had F1 cars are sheer brilliance in technological advancement's and are pretty much orgasmic to watch go around corners.

If you get what it takes and what is going on in the car to make these things happen, it does not matter if its left or right turn, or all lefts or all rights.

I had the privilege of having an all access pass to the race at California speedway two weeks ago courtesy of Uncle Joe Benson from 100.3 The Sound,

Got to watch the race from inside the TV broadcast booth right next to Rusty Wallace.

As the geek that we are it was amazing to watch the whole production go down from beginning to end.

And yes I have pics to back it up.
Post 9,501 made on Thursday April 2, 2015 at 11:10
Hi-FiGuy
Super Member
Joined:
Posts:
January 2004
2,836
[URL=[Link: s703.photobucket.com]][IMG][/IMG][/URL]

[URL=[Link: s703.photobucket.com]][IMG][/IMG][/URL]

[URL=[Link: s703.photobucket.com]][IMG][/IMG][/URL]

[URL=[Link: s703.photobucket.com]][IMG][/IMG][/URL]

[URL=[Link: s703.photobucket.com]][IMG][/IMG][/URL]

[URL=[Link: s703.photobucket.com]][IMG][/IMG][/URL]

[URL=[Link: s703.photobucket.com]][IMG][/IMG][/URL]

[URL=[Link: s703.photobucket.com]][IMG][/IMG][/URL]

[URL=[Link: s703.photobucket.com]][IMG][/IMG][/URL]

[URL=[Link: s703.photobucket.com]][IMG][/IMG][/URL]

[URL=[Link: s703.photobucket.com]][IMG][/IMG][/URL]
[URL=[Link: s703.photobucket.com]][IMG][/IMG][/URL]

[URL=[Link: s703.photobucket.com]][IMG][/IMG][/URL]

[URL=[Link: s703.photobucket.com]][IMG][/IMG][/URL]

[URL=[Link: s703.photobucket.com]][IMG][/IMG][/URL]
Post 9,502 made on Thursday April 2, 2015 at 16:31
Mr. Stanley
Elite Member
Joined:
Posts:
January 2006
16,954
I miss the old days when they used real cars (stock-car racing)... not tubular framed things with plastic bodies and graphic wraps... Watching a 65 Ford Galaxy 392 racing against a 65 Impala SS aqnd a few other stock rigs.

...Now its just a bunch of multi million dollar teams with spoiled drivers, racing practically identical fake cars... I'd watch it, if they went back to racing real factory cars out there. just sayin'

That was back when men were men and racing was racing... remember Fireball Roberts, Wendell Scott, Bobby Allison, A.J. Foyt (before he went to Indy).

Them was the days!

Last edited by Mr. Stanley on April 2, 2015 20:26.
"If it keeps up, man will atrophy all his limbs but the push-button finger."
Frank Lloyd Wright
Post 9,503 made on Thursday April 2, 2015 at 18:58
Eastside A/V
Select Member
Joined:
Posts:
September 2006
1,782
Demolition and Abatement beginning at our new building in Bellevue, WA a part of which will house our new showroom in a couple months (and part to be rented out to other tenants).

Initially our part of the space will be about 1200 (out of 4700); and will have a couple offices, small warehouse, an 8 person theater room, Family room/Man Cave Space (with a full bar/kitchen), Multiple control and automation technologies plus a Conference room with smart board and Video-Teleconferencing equipment and more.





Thank you to all who I've met and learned from over the years.  It feels great to finally be making the transition from a 'trunk-slammer' to real business these past 18 months.

Amir if you come across this, thank you for allowing me the opportunity to be part of your team from 2011-2013, much was learned and reflected upon and has allowed me to grow my business in a direction that best suites my vision.

Last edited by Eastside A/V on April 2, 2015 19:08.
Bryan Levy
www.eastsideav.com
Gallery: [Link: eastsideav.com]
Post 9,504 made on Thursday April 2, 2015 at 19:23
edizzle
Loyal Member
Joined:
Posts:
March 2005
5,916
On April 1, 2015 at 22:41, Hi-FiGuy said...
He meant F1 so both left and right turns.

how do you figure? Ive never known F1 to race bristol!
I love supporting product that supports me!
Post 9,505 made on Thursday April 2, 2015 at 20:19
roddymcg
Loyal Member
Joined:
Posts:
September 2003
6,796
On April 1, 2015 at 22:41, Hi-FiGuy said...
He meant F1 so both left and right turns.

And a turn is a turn is a turn and cars that are set up to turn one way are pretty interesting beasts.

Needles to say they are harder to keep going in a straight line than turning. you let go of the wheel on them and they turn left.

On the other had F1 cars are sheer brilliance in technological advancement's and are pretty much orgasmic to watch go around corners.

If you get what it takes and what is going on in the car to make these things happen, it does not matter if its left or right turn, or all lefts or all rights.

I had the privilege of having an all access pass to the race at California speedway two weeks ago courtesy of Uncle Joe Benson from 100.3 The Sound,

Got to watch the race from inside the TV broadcast booth right next to Rusty Wallace.

As the geek that we are it was amazing to watch the whole production go down from beginning to end.

And yes I have pics to back it up.

http://www.bristolmotorspeedway.com/

Looks like a lot of left turns to me. If guys are making right turns on the track I might be able to get into the event.
When good enough is not good enough.
Post 9,506 made on Thursday April 2, 2015 at 20:32
3PedalMINI
Loyal Member
Joined:
Posts:
July 2009
7,860
,
On April 2, 2015 at 18:58, Eastside A/V said...
Demolition and Abatement beginning at our new building in Bellevue, WA a part of which will house our new showroom in a couple months (and part to be rented out to other tenants).

Initially our part of the space will be about 1200 (out of 4700); and will have a couple offices, small warehouse, an 8 person theater room, Family room/Man Cave Space (with a full bar/kitchen), Multiple control and automation technologies plus a Conference room with smart board and Video-Teleconferencing equipment and more.





Thank you to all who I've met and learned from over the years.  It feels great to finally be making the transition from a 'trunk-slammer' to real business these past 18 months.

Amir if you come across this, thank you for allowing me the opportunity to be part of your team from 2011-2013, much was learned and reflected upon and has allowed me to grow my business in a direction that best suites my vision.

Dude! Congrats, best of luck
The Bitterness of Poor Quality is Remembered Long after the Sweetness of Price is Forgotten! - Benjamin Franklin
Post 9,507 made on Thursday April 2, 2015 at 20:32
3PedalMINI
Loyal Member
Joined:
Posts:
July 2009
7,860
,
On April 2, 2015 at 18:58, Eastside A/V said...
Demolition and Abatement beginning at our new building in Bellevue, WA a part of which will house our new showroom in a couple months (and part to be rented out to other tenants).

Initially our part of the space will be about 1200 (out of 4700); and will have a couple offices, small warehouse, an 8 person theater room, Family room/Man Cave Space (with a full bar/kitchen), Multiple control and automation technologies plus a Conference room with smart board and Video-Teleconferencing equipment and more.





Thank you to all who I've met and learned from over the years.  It feels great to finally be making the transition from a 'trunk-slammer' to real business these past 18 months.

Amir if you come across this, thank you for allowing me the opportunity to be part of your team from 2011-2013, much was learned and reflected upon and has allowed me to grow my business in a direction that best suites my vision.

Dude! Congrats, best of luck
The Bitterness of Poor Quality is Remembered Long after the Sweetness of Price is Forgotten! - Benjamin Franklin
Post 9,508 made on Thursday April 2, 2015 at 20:40
Mr. Stanley
Elite Member
Joined:
Posts:
January 2006
16,954
Is that up on 148th? Is Michael still working with you?
"If it keeps up, man will atrophy all his limbs but the push-button finger."
Frank Lloyd Wright
Post 9,509 made on Thursday April 2, 2015 at 20:43
3PedalMINI
Loyal Member
Joined:
Posts:
July 2009
7,860
double post?
The Bitterness of Poor Quality is Remembered Long after the Sweetness of Price is Forgotten! - Benjamin Franklin
Post 9,510 made on Thursday April 2, 2015 at 22:41
Eastside A/V
Select Member
Joined:
Posts:
September 2006
1,782
Bruce, Yes (Main ST and 148th AVE) with great street frontage and No to Michael (he moved on almost a year ago to grow his 'growing' operation full time)

I was fortunate to bring on an awesome lead in December who i'm beginning to groom for project management and programming and an apprentice who started fresh with us 9 months ago and is beginning to come into his own as well.

We'll probably be adding another installer in the 3rd quarter if my sales guy starts closing his share of the business and if he does we should easily clear a 1.1-1.3mil in sales for the year...which I would be ecstatic about.
Bryan Levy
www.eastsideav.com
Gallery: [Link: eastsideav.com]
Find in this thread:
Page 634 of 761


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse