|
|
|
Custom Installers' Lounge Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
Topic: | Hard Rock This thread has 13 replies. Displaying all posts. |
|
Post 1 made on Friday March 28, 2003 at 13:38 |
Thon Founding Member |
Joined: Posts: | November 2001 726 |
|
|
I was hanging some TVs for the local Hard Rock cafe and ran into some metal when drilling through drywall. I kept drilling and it turned out to be two layers of drywall with a thin (maybe 1/8") layer of metal in between. Anybody seen this before?
|
How hard can this be? |
|
Post 2 made on Friday March 28, 2003 at 13:44 |
Theaterworks Founding Member |
Joined: Posts: | April 2002 1,898 |
|
|
I've heard of a sheet of lead being used between sheets of drywall for sound damping. Was the metal soft?
|
Carpe diem! |
|
OP | Post 3 made on Friday March 28, 2003 at 14:55 |
Thon Founding Member |
Joined: Posts: | November 2001 726 |
|
|
No. I had to get a metal bit to get through it.
|
How hard can this be? |
|
Post 4 made on Friday March 28, 2003 at 18:10 |
Matt Founding Member |
Joined: Posts: | August 2001 1,802 |
|
|
Probably backing for you to hang your televisions on. If they have a 'cookie stamp' design, or maybe just a good architect, this could have been specified in the wall.
|
|
Post 5 made on Saturday March 29, 2003 at 00:13 |
Ahl Founding Member |
Joined: Posts: | October 2001 1,241 |
|
|
depends on where' local' is... If near the coasts or in the Midwest, it could be for structural strengthening to prevent wind damage...
I wouldn't depend on it to hold a tv, though...
|
We can do it my way, or we can do it my way while I yell. The choice is yours. |
|
Post 6 made on Saturday March 29, 2003 at 10:20 |
Matt Founding Member |
Joined: Posts: | August 2001 1,802 |
|
|
Well, if you use togglers, I guess I don't see the difference between that and aluminum studs, which hold TV's just fine.
|
|
Post 7 made on Saturday March 29, 2003 at 10:30 |
Ernie Bornn-Gilman Yes, That Ernie! |
Joined: Posts: | December 2001 30,104 |
|
|
Please, tell everybody that there are no aluminum studs.
They are thin and flimsy, but they are steel. And as soon as several screws are put through drywall and into them, they are about as rigid as wood. That is why they are acceptable to hold up walls and ceilings, even though they are dog exhaust when it comes to holding up TVs.
|
A good answer is easier with a clear question giving the make and model of everything. "The biggest problem in communication is the illusion that it has taken place." -- G. “Bernie” Shaw |
|
Post 8 made on Sunday March 30, 2003 at 13:34 |
Matt Founding Member |
Joined: Posts: | August 2001 1,802 |
|
|
That is not true Ernie, take a look here. I've use these and they are solid as a rock.
|
|
Post 9 made on Thursday April 3, 2003 at 19:15 |
THXRick Long Time Member |
Joined: Posts: | October 2002 241 |
|
|
Ill have to agree with Matt Ernie. But have used just plywood in same situation with Plasmas.. The problem lies in screws stripping out of metal studs. Have even gone as far as toggles thru metal studs to hold up plywood before mounting plasma mount to it..
|
|
Post 10 made on Thursday April 3, 2003 at 23:55 |
Impaqt RC Moderator |
Joined: Posts: | October 2002 6,233 |
|
|
Everybody thinks that their way of doing something is great until is fails them.
Think about this folks, How many TV's falling off a wall and onto a person would it take for your business to be ruined? If you think the answer is more than one, your wrong.
That link to that peerless Bracket is pretty funny.... It supports up to #125. The Dual Arm Jumbo mounts range anywhere form 55-67 lbs all by them selves! That leaves enough capacity to support a decent 20" TV
|
|
|
Post 11 made on Friday April 4, 2003 at 21:34 |
Matt Founding Member |
Joined: Posts: | August 2001 1,802 |
|
|
I've hung TV's for more than 10 years, the company for more than 20 years. Not one has fallen. Make your own conclusions.
|
|
OP | Post 12 made on Monday April 7, 2003 at 10:38 |
Thon Founding Member |
Joined: Posts: | November 2001 726 |
|
|
Matt,
I don't doubt your credentials, but Impaqt appears to be right according to the peerless specs. Anyway I solved the problem by installing a 4x4 across some trusses and hanging the TV from a soffit. Passed the chin-up test. I have since decided to avoid wall mounts as the torque on the upper bolts is so large.
|
How hard can this be? |
|
Post 13 made on Monday April 7, 2003 at 17:05 |
Impaqt RC Moderator |
Joined: Posts: | October 2002 6,233 |
|
|
Matt, My conclusion is that I value my customers lives more than taking the easy way out.
I hope you never need to re-think the way you do things for the wrong reason.
|
|
|
Post 14 made on Monday April 7, 2003 at 20:24 |
Matt Founding Member |
Joined: Posts: | August 2001 1,802 |
|
|
...
This message was edited by Matt on 04/07/03 20:43.
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|